Ravin

1) Purchaced in August 2007, Fry's Electronics Wilsonville OR.
2) see sig
3) see sig
4) OC 450x8=3.6GHz
vCORE 1.400 (real)
CPU VTT 1.40V
CPU PLL 1.60V
CPU GTL 0.63x
vNB 1.49 (real)
NB GTL 0.63x
5) see sig
What gives with all the old stock at Newegg? Not that it is bad- those early G0's are great with voltage scaling and heat. Both of those have "Born on" dates that make them older than mine!

How's your chip MasterKromm? L727 and L737 were supposedly the weeks with a high percentage of cherry chips for the Q6600s. Granted yours is a Q6700, it rolled off the line same week as mine.

__________________
Maximus Overhaul *Updated 03/05/08*

CPUz Valid 400x9CPUz Valid 450x8
Ask me about my private DII Battlenet server.

GigaByte

Purchase date and retailer: September 19, 2007 from MemoryExpress
Batch #: Q712A577
VID: 1.2000v
OC: 3.40Ghz
vCore: 1.36v
NB volts: Stock
FSB volts: Stock
PCI-E volts: Stock
RAM volts: 2.1v (stock)
Mobo maker: GIGABYTE (GA-P35-DS4)
NB chipset: P35

__________________

MasterKromm

Well my VID is 1.275... Not nearly as nice as Eric's. But I'm fooling around right now @ 1.39 vCORE and 333x10 seems pretty stable I'll probably bump up FSB to 360 and see if I'm able to boot into windows... Though I won't be stressing too hard until I feel the AS5 is set in real good.

SPI1M 15.22 Sec, that destroyed my poor little e4300s previous best. I almost feel bad... Muhaha I called in sick and skipped class; suffice to say it was well worth it ! Can't wait to find my max benchable and then stable OCs... So far this Xigmatek S1283 seems pretty capable, the Q6700 actually idles at only +1°C of my e4300's idle temps which was on less voltage and had C1E and EIST enabled.



BTW thanks for sharing guys.

-EDIT- Tiny little update

360x10 was still stable on 1.39v and everything else but ram(2.15v) still stock.

3dmark06 -> 16,973



SPI1M -> 14.00 sec



Not too shabby methinks...

-EDIT- #2

SPI1M -> 12.609s @ 4.0ghz 1.49V

__________________

whe3ls

this has more less been done already
http://www.overclock.net/intel-cpus/...c-voltage.html

__________________

Robilar

purchased at infonec April 2008

L740B384 Batch

QX9650 C0 revision

VID: 1.1250

3.9 Ghz (390x10) at 1.38 vcore (in bios not windows)

EVGA 790i Ultra no mods as yet

all other voltages are stock including ram

The Duke

Sig Q6600 Slacr
Microcenter BnM Purchased ??? have to check
L737B277 Package date 11/02/07
Vid 1.265
Dark P38
Had it up to slightly over 3700 stable
Currently 3508MHz 24/7 @ 1.407v

Q6600 Slacr
Microcenter BnM Date purchased ???
L741A939 Package 12/29/07
More on it in about a week.

__________________

Ravin

That was supposed to be the "superstar" week. Any chance you'll try for 4GHz?

__________________
Maximus Overhaul *Updated 03/05/08*

CPUz Valid 400x9CPUz Valid 450x8
Ask me about my private DII Battlenet server.

MasterKromm

Not quite... Mostly C2Ds and no VIDs, origin/date of purchase or Chipset/mobo posted. I'll also put everyone's details/specs into a table(in a week or so).

Thanks for sharing... But this is a C2Q database. ><

Looking good, think you could post the vid too? It can be found in Coretemp.

Thanks for sharing duke! Sounds like you landed a sweet Q6600.

__________________

reezin14

1)Purchased from:NewEgg /4-24-08(RMA) New one 5-13-08.
2)Q6600 Go SLACR Batch #L804A753
3)VID 1.265
4)OC 3.7 Vcore 1.39
5)Mobo:GA-P35-DS3L chipset Intel

Attached Thumbnails

 

__________________
Q6600@3.9
http://valid.x86-secret.com/show_oc.php?id=383427

MasterKromm

-BUMP- Added some more of my own results; Peeps we need more, post your C2Q OCs + info!

3.0ghz (1.136V) 3hr 15min (I stopped priming when I became bored ><)


3.333ghz (1.248V) 4+ hrs and counting


4.1ghz SPI 1M run 12.296s (1.552V) I may have overvolted a little considering my 32M stable V


4.05ghz SPI 32M run 12mins 45sec (1.52V)

__________________