japan1

Here's a list of programs which include overclocking in windows tools, although I've never had any luck with any of them.

Thanks

__________________

dasparx

Hey, you need to add a 'special thanks to' and add me there
*cough* looks at those 7 PM's *cough*

__________________
Got a free PCI-E x1 Slot, and want to do more folding? Click here!

japan1

Done

__________________

dasparx

Thx mate
Nice guide anyways, and you could maybe add the info about 1333 'oc' Boards(you have info on that, but im referring to 945 chipsets), and that Mobo's with SiS chipsets will most likely not work with the bsel mod.

__________________
Got a free PCI-E x1 Slot, and want to do more folding? Click here!

japan1

Good point, I'll add that about 'overclocking mode' boards. I've got an MSI board somewhere which has an SiS chipset I'll go dig it out and test it.

Edit: Board is that old it doesn't support anything newer than a pentium D.

__________________

biatchi

Nice guide

__________________

Basically Random Idiotic Terrible Insanely Stupid Humour

japan1

__________________

TheLegend

Great guide mate.

__________________
|

OlliiillO

Dear Joe,

I want to start off by saying I am a modding fool.I have modded lots of things in the past from cd players to cpu's to mobo's to Graphics cards and all sorts......ect...


I took a look at ur mod and thought to myself,"I'll give it a shot!".So i did,and as sad as it may be this mod did not work for my E8400 45nm Wolfdale.

However,ur mod doesnt say weather not to cover the exposed pins on the LGASOCKET 775 or just let them connect to the cpu,so i just went with what is fact.You didnt say to so i didnt lol! . But i will send u some pics of what i did and i would REALLY like for you to help me out.
so plz reply to this message ANYONE and help a fellow extremest!



P.S. I USED A SILVER CONDUCTIVE PEN TO WRITE THE TRACE OVER THE TWO PADS.

You can email me anytime at: olliiillo@yahoo.com Thanks in advance


This is my first time submitting a post here.But I have read lots of forums and posts from many of the users here.I want you all to know that i visit like a bazzillion sites and I like the posts here the best!

Also I was going for a 1600 (400x9) from a 1333 to acheve a 3.6 However i just wanted to reach 5.0Ghz. considering i have already had it to 4.88Ghz.

Attached Thumbnails

     

japan1

For starters, welcome to the forum.

I'm a little confused about what you're trying to do here, are you trying to BSEL from 1333 to 1600? I'm not familiar with that mod, and i've never used an E8xxx CPU so I'm not sure how it would work on a wolfdale. And 4.88Ghz is a very good overclock, so is a BSEL mod really necessary.

On the plus side, your method is fine, it doesn't matter if the pins are covered, as long as they are connected.

And who's Joe?

__________________