MasterPhatass

Thanks guys, i will do the bsel mod as soon as i get copper tape.. anyone know where to get it in australia? lol.
I'll report back. might be a while though.
THANKS THANKS THANKS.

EDIT: er guys, is copper tape like the tape you use on guitars? O_o

goldman11

i don't get it how am i suppose to do the VID mod? the picture doesn't show where am i suppose to do it could you give a better one? like the FSB pic
thanks

jeremygj

is there any alternatives to do the VID mod besides an conductive ink pen? Using tin foil is impossible and will arctic silver 5 work because it has silver in it?

porschegonzo

Have a question about the E8200. The bus speed is already 333 so is there anything that can be done to increase the speed of the cpu? FYI this is in an Inspiron 530 with the 0RY007 motherboard so i cant upgrade to the quads. I tried the inspiron 530 bios hack which DID work, only to find out that the mod would only let you increase the bus speed to 333. SOO that means if you have any cpu other than an E8200,E8300,E8400,E8500,E8600 then you can do the mod, which is what i should have done to my E6420. oh well i got a good deal on the 8200 so is there anything that can be done to change the multiplier or increase the fsb a little?

Georgegtb

where do you get copper tape from in the uk cheaply and is this ok to use?

http://www.maplin.co.uk/Module.aspx?ModuleNo=4098

and this for my HS http://www.amazon.co.uk/Skytronic-He...0609930&sr=8-7

TY for the response

japan1

Yeah that Maplin stuff looks fine, just look for conductivity.

And for thermal paste, I'd look for a branded tube like AS5 etc.

__________________

cloud17

hello,
i have e2180 proc
i done 1333 mod and not stable and the vid mod dont work ithink my default vcore is 1.2750v (from core temp overcloked bsel) and in box it says 1.35v so which mod should be applied here i am very confused and i did a vid mod but no boot (the one on front page)
any one help

here is the chart/sheet for this processor ...thanks in advance

cloud17

check it with a multimeter if it conducts then you can use ..but wont the processor get dirty and the socket (and its really hard to clean when its get in there)

MasterPhatass

worked, bought pipe cooling and 2.93 stable. also got new psu..

o0revenger0o

I can't use this mod because my mobo's FSB is 800mhz, right ?
Here are the specs of the mobo:

http://h10025.www1.hp.com/ewfrf/wc/d...445421&lang=en