praga

im scared cz what happens if it damages the pins in the mobo
no warranty for damaged pins also hmm also what you mean by tin foil

Andr3az

It won't damage the pins if you know what you'r doing.

Also by tin foil ( also called aluminium foil ) I meant the stuff conspiracy theorists use to make hats ( keeps the aliens from readin your and your cats minds ):



And its also used for cooking:




Here is a pic of BSEL mod with tin ( aluminium ) foil:

__________________

praga

i took quality streers chocolate paper i think its also aluminum and did the mod for BSEL and Volt (BSEL like the one in the picture you have posted but volt mod i did like the one in the 1st page) BSEL is working properly but the volt mod is not working its still in the 1.325 why your one is different from the one in the 1st page

praga

this is how i modded my cpu but the volt mod is not working guys please help me cz i get bsod sometimes

Andr3az

The pic isn't mine. I would have showd you how I did mine, but I lost / deleted or did something with it.

Anyways, try doing the 1.475mod. Make sure that you have C1E, Eist and other power saving options turned off in BIOS.

__________________

daanielin

Does anyone know how to mod E5200 to 1333 and raise the volts to. +1.35?

__________________

praga

i checked my processor data sheet and i think i did correctly but hmm im in a confusion now
please clear this to me
will the volt mod display the correct volt in the cpu z or everest or core temp,
cz i get 1.3250 in all the software but in the bios its 1.363 or 1.364 im really confused, hmmm also another doubt is it possible to do the vid mod with a pencil.

Andr3az

It should show correct volt in CPU-Z ( well.. I think, don't know 100% ).

__________________

praga

hmmm i still confused then why the bios volt is higher than this cpu z volt
i did stop only the intel speed stepping i have search other things in my bios

tobyglyn

I have a Dell T3400 I am trying to upgrade by BSEL mod'ing a Q6700. It will boot at 3.3 but will fail pretty quickly and I am hoping that maybe a voltage boost will allow it to be stable. With the CPU set at default 2.66GHz RealTemp reports my VID core as min 1.1625 max 1.3000.
Is there an appropriate VID mod diagram for a suggested boost?

thanks in advance