Intel BSEL & VID mod Guide - Page 26 - Overclock.net

mattliston · 09-20-09

does any of this apply to amd procs?

I see processor data sheets coming up, is that an easy to find thing? all I find is PDF files describing specifics of teh amd's, not actually showing a pin out diagram

Im still searching, but a kick in the right direction would be cool

-Matt

jmsandrsn · 09-23-09

Quote:

Originally Posted by praga

i checked my processor data sheet and i think i did correctly but hmm im in a confusion now
please clear this to me
will the volt mod display the correct volt in the cpu z or everest or core temp,
cz i get 1.3250 in all the software but in the bios its 1.363 or 1.364 im really confused, hmmm also another doubt is it possible to do the vid mod with a pencil.

CoreTemp and other similar programs will NOT read the modified voltage after you've done the VID mod. However, as long as it was done correctly then the motherboard should recognize the new voltage (that's what really counts).

Here's the real world way to tell if VID mod was successful. First off, you should only have been doing the VID mod due to the CPU not being stable with default VID. If it is more stable or totally stable after doing the mod then the mod must have worked.

jmsandrsn · 09-23-09

Quote:

Originally Posted by tobyglyn

I have a Dell T3400 I am trying to upgrade by BSEL mod'ing a Q6700. It will boot at 3.3 but will fail pretty quickly and I am hoping that maybe a voltage boost will allow it to be stable. With the CPU set at default 2.66GHz RealTemp reports my VID core as min 1.1625 max 1.3000.
Is there an appropriate VID mod diagram for a suggested boost?

thanks in advance

Q6700's can be a bit harder because they will always require a voltage boost (at least they have in my experience). Based on what you put into your post it sounds like your VID is 1.3v. I would go directly to a mod to 1.45v. Also, I assume that you're using the heatsink with the copper bottom and the 6 heatpipes coming out at the top?

kora04 · 09-29-09

can anyone confirm this guide please!
http://starless.nl/pinmod.html

mattliston · 09-29-09

looks legit to me. have you compared it to other c2d pin guides? if it looks the same, its potentially accurate. sorry, dont know what else to tell you

C.Jackson · 10-02-09

I may buy a CPU and try this with the BTX board in my sig rig before I give it to my brother. It's a G965 board, think I'd have any problems with a 45nm CPU? Which one would be the better choice, E5200 or E5300? I'd only want to do the 800 to 1066....

jmsandrsn · 10-11-09

I don't think 45nm CPU's will work with that chipset.

Here's why. I did a google search for: DG965LV The first search result says that it's a Gateway version of DG965MQ. Under the following link for DG965MQ I see no 45nm processors listed: http://processormatch.intel.com/Comp...rdname=dg965mq

nemaca · 1 Week Ago

Hi,
I just made a Vmod and BSEL on my e5200 and I have problem: can't restart the system, I have to turn it off from the Shut-down button, then start it up again. It sounds like wants to start but cooler makes an attempt to stop, then restarts, and so on.

What could cause it and how to solve it?

ANY ideas?

NVM, I solved it.

**CL3P20** · 1 Week Ago

Heres a shot of a pin-mod'd P4 Mobile, 2.66ghz of mine...keep in mind its default FSB is 100mhz...225% FSB OC anyone?

FSF-Foxhound · 1 Week Ago

!!!!!!!!!!!!!!!!!!!
wow

		Overclock.net - Overclocking.net > Intel > Intel CPUs
Intel BSEL & VID mod Guide

09-29-09	#254 (permalink)
kora04 New to Overclock.net Join Date: Sep 2009 Posts: 53 Rep: 0 Unique Rep: 0 Trader Rating: 0	can anyone confirm this guide please! http://starless.nl/pinmod.html

10-11-09	#257 (permalink)
jmsandrsn New to Overclock.net Join Date: Feb 2006 Posts: 12 Rep: 5 Unique Rep: 3 Trader Rating: 8	I don't think 45nm CPU's will work with that chipset. Here's why. I did a google search for: DG965LV The first search result says that it's a Gateway version of DG965MQ. Under the following link for DG965MQ I see no 45nm processors listed: http://processormatch.intel.com/Comp...rdname=dg965mq

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)