|
![]() |
Overclock.net - Overclocking.net > Intel > Intel CPUs | |
q9540 stable OC for 24/7 results
|
||
![]() |
|
|
LinkBack | Thread Tools |
|
|
#1 (permalink) | ||||||||||||
|
Intel Overclocker
|
How does this look for a 24/7 OC on this CPU?
440*8 = 3520MHz 1.275v set in bios, undervolts to 1.24v and no vdroop thanks to loadline calibration. 1.42 on the nordbridge, the NB keeping at 48c. ![]() I actually booted on 3.8GHz, with 1.26v on vcore, but i got a crappy ram, and it couldnt handle it. So far i have to say.... if i got a better ram this CPU is an insane OCer! Pic attached, tom
__________________
18,456 DMarks - single card ![]() My q9450 OC thread and validation RIP my lovely board - http://www.overclock.net/intel-gener...tml#post960351
Last edited by tomaskir : 07-18-08 at 05:13 AM |
||||||||||||
|
|
|
|
|
#2 (permalink) | ||||||||||||
|
PC Gamer
![]() |
Too bad... you could go so much higher.
Whats the VID on that?
__________________
Quote:
|Nikon D60|18-55 f3.5-5.6 VR|35 f1.8|SB-600|Velbon 803R|
|
||||||||||||
|
|
|
|
|
#3 (permalink) | ||||||||||||
|
Intel Overclocker
|
1.21v vid. So, any recommendations on a ram that can handle about 1000Mhz with decent timings? (5-5-5-15)
A quad on 4GHz on air would be ... mmmmm.
__________________
18,456 DMarks - single card ![]() My q9450 OC thread and validation RIP my lovely board - http://www.overclock.net/intel-gener...tml#post960351
|
||||||||||||
|
|
|
|
|
#4 (permalink) | ||||||||||||
|
PC Gamer
![]() |
I am about to throw up in disgust...
Thats an awesome VID mate I think. OCZ Reaper is pretty good, what chipset and RAM is your motherboard first of all?. My OCZ Reaper 2x2gb 800Mhz 6-6-6-24 can overclock itself to 1006Mhz 5-5-5-15. DDR2 or DDR3? If DDR2, you can get the OCZ ReaperX that comes at 1000Mhz and overclock that further.
__________________
Quote:
|Nikon D60|18-55 f3.5-5.6 VR|35 f1.8|SB-600|Velbon 803R|
|
||||||||||||
|
|
|
|
|
#5 (permalink) | ||||||||||||
|
Intel Overclocker
|
x38 chipset DDR2, running the stuff in my sig rig. As for ram, when i went for 3.8, the ram couldnt handle 950MHz even with 6-6-6-22-2t. Its corsair XMS TwinX, using 4x 1GB sticks, the 800MHz CL4 ones, looks like i got a really crappy chips there tho. The way its now: 1.42v on the nordbridge, 48c. A whopping 2.25v on the rams to keep this stable.
__________________
18,456 DMarks - single card ![]() My q9450 OC thread and validation RIP my lovely board - http://www.overclock.net/intel-gener...tml#post960351
Last edited by tomaskir : 07-18-08 at 05:01 AM |
||||||||||||
|
|
|
|
|
#6 (permalink) | |||||||||||||
|
Intel Overclocker
![]() |
Nice overclock on that CPU
Why don't you unlink your RAMs from the FSB, that will give you some room to put that Q9450 @ 3.8GHz ![]()
__________________
Photo Equip: Body: Canon EOS XS/1000D | Bag: LowePro Fastpack 250 Canon lenses: EF-S 18-55mm ƒ/3.5-5.6 IS | EF-S 60mm ƒ/2.8 Marco USM | EF 70-200mm ƒ/4L IS USM Sigma lenses: 30mm ƒ/1.4 EX DC HSM [0/360€] | 10-20mm ƒ/3.5 EX DC HSM [0€/525€] Project ИιהєBязλκεя Updated May,31 2009 My Flickr
|
|||||||||||||
|
|
|
|
|
#7 (permalink) | ||||||||||||
|
PC Gamer
![]() |
By that I assume you use DDR2.
Product Page here: http://www.ocztechnology.com/product...pc_4gb_edition But honestly, most of the products on the below page would suit you well. http://www.ocztechnology.com/product.../reaper_series
__________________
Quote:
|Nikon D60|18-55 f3.5-5.6 VR|35 f1.8|SB-600|Velbon 803R|
|
||||||||||||
|
|
|
|
|
#8 (permalink) | ||||||||||||
|
Intel Overclocker
|
I didnt see a memory unilnk anywhere in the bios. Not sure if x38 can do it, or if this board can do it.
__________________
18,456 DMarks - single card ![]() My q9450 OC thread and validation RIP my lovely board - http://www.overclock.net/intel-gener...tml#post960351
|
||||||||||||
|
|
|
|
|
#9 (permalink) | |||||||||||
|
New to Overclock.net
|
i got 3.4 on mine and have room to keep going. BUT im not going to.....yet
__________________:-P also got my 4870s overclocked quite a bit with this new fan hack that has me idling at 46 celcius and loading at 70 I got plenty of headroom for OCing!!!! anyhow nice OC. I was hoping to do a suicide run at 533x8 so i could do a 1:! ratio but I dont trust this cooler. Maybe ill yank my dtek fuzion out of my other rig and see what i can get btw do you have the c1 stepping? I have it and this chip seems magical and golden. 3.4@ 1.24 vcore on air is super sick
|
|||||||||||
|
|
|
|
|
#10 (permalink) | ||||||||||||||
|
Intel Overclocker
![]() |
Quote:
![]() EDIT: 3.52 with only 1.275v on the BIOS? Thats great, that gave me an idea on how far I can get mine to, that 3.6GHz I got to was a "quick" OC to benchmark and I had set the BIOS to 1.3125v vdroop to 1.280v, and it ran quite stable after a couple of 3DMark06 runs. But it heats up alot during 8k FFTs, it easily hits over 70C. Poor Zalman 9500 can't handle 1GHz overclock lol
__________________
Photo Equip: Body: Canon EOS XS/1000D | Bag: LowePro Fastpack 250 Canon lenses: EF-S 18-55mm ƒ/3.5-5.6 IS | EF-S 60mm ƒ/2.8 Marco USM | EF 70-200mm ƒ/4L IS USM Sigma lenses: 30mm ƒ/1.4 EX DC HSM [0/360€] | 10-20mm ƒ/3.5 EX DC HSM [0€/525€] Project ИιהєBязλκεя Updated May,31 2009 My Flickr
Last edited by Dragoon : 07-18-08 at 05:46 AM |
||||||||||||||
|
|
|
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|