Originally Posted by DaClownie

Term is high for starters... I wouldn't think enough vcore either...

Also, it appears in your sig that you're running 1000mhz RAM and your 533x7.5 is overclocking your RAM?

Originally Posted by bigworm

not what i meant to say. Meant to say keep my ram at stock speeds 1066mhz but overclock my e8400 to 4.0ghz.

Grunion: What voltage would you suggest for term?

Originally Posted by BIGWORM

K guys, I'm having much problems trying to boot at 533x7.5. I'm trying to not underclock my RAM, and achieve 4.0 GHz at the same time: I'll pot my form:

CPU = E8400
Motherboard = EP45-UD3R
BIOS Version = F9a
Ram = 4GB (2x2) OCZ Gold

MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster ...............: Auto
CPU Clock Ratio .............................: 8
Fine CPU Clock Ratio.....................: 0.0
CPU Frequency ..............................: 4.00GHz


Clock Chip Control
Standard Clock Control
CPU Host Clock Control..................: Enabled
CPU Host Frequency (Mhz) ............: 500
PCI Express Frequency (Mhz) .........: 100


DRAM Performance Control
Performance Enhance...................: Standard
Extreme Memory Profile (X.M.P.).....: Disabled
(G)MCH Frequency Latch...............: Auto
System Memory Multiplier ..............: 2.00D
Memory Frequency (Mhz) ..............: 1000
DRAM Timing Selectable ................: Auto

Standard Timing Control
CAS Latency Time........................:5
tRCD .............................................:5
tRP............................................... ..:5
tRAS.............................................. :15


Advanced Timing Control
tRRD...........................................: Auto
tWTR..........................................: Auto
tWR............................................: Auto
tRFC...........................................: Auto
tRTP...........................................: Auto
Command Rate (CMD) ....................: Auto


Channel A
Static tRead Value.........................:11
Channel B
Static tRead Value.........................:11


Motherboard Voltage Control
CPU
CPU Vcore….………................................:1.268
CPU Termination…..... 1.200V*...............: 1.28
CPU PLL…………………....1.500V*.......:1.57
CPU Referen.…………....0.755V*...........: .810

MCH/ICH
MCH Core…………….....1.100V...........: 1.28
MCH Reference….…….0.800V............:.75
MCH/DRAM Ref.…......0.900V..............:Auto
ICH I/O……………….....1.500V............:Auto
ICH Core…………...……1.100V...........:Auto

DRAM
DRAM Voltage ……....1.800V............:2.00
DRAM Termination .…0.900V............:Auto
Channel A Reference 0.900V............:Auto
Channel B Reference 0.900V............:Auto

For the life of me, I tried just changing the multi/FSB to 533x7.5 and I immediately get stop F4 error's in my face. Any ideas?

Originally Posted by BIGWORM

Well, followed NoGuru's advice on upping the term and mch accordingly, now I'm back to where Win7 won't recognize a graphics adapter. I've ran into this before, and looks like I won't be able to get of it. =/

Originally Posted by BIGWORM

I got it at stock right now (100MHz). I'm not one to play with the PCI Frequency because last time I did, I friend an old xfx 7600gs a long time ago.