The Intel Q9450 Club - Page 11 - Overclock.net

=Digger= · 09-07-08

Count me in too!

Quote:

Originally Posted by The Vector Kid

Question of the Day:

This is for all you 9450 owners. My particular CPU has an improperly soldered die; as such, my hottest core is usually 12c above my lowest core. What kind of differences do you guys have?

I get about 3-6 C difference, depending on load

Quote:

Originally Posted by TrueNoob

you should definitely be able to. heat might become an issue up around that area. but 3.6 is definite in my book. you have watercooling anyhow so i dont see a problem at all.

are you stable at that? i would like to know how you did it if your stable. im stuck at 3.3 being my furthest stable but being able to load in at 3.6

My CPUZ validation is at 3.6, but it runs in the low 60's at that speed, since I fold on this rig 7/24, I usually keep it at 3.2. -- Runs in the mid to high 50's at 3.2.

Quote:

Originally Posted by TrueNoob

for me my Idle was in the 39 39 45 47, something close to that, my load was 61 61 66 68 at a 1.4vcore in bios,i started at 1.35,booted in also, but 1.4 was most stable i forgot what it was in windows load/idle

My idle temps are in the low 30's, but I never seem to leave it idle long...

http://valid.x86-secret.com/show_oc.php?id=393264

TrueNoob · 09-07-08

Quote:

Originally Posted by =Digger=

Count me in too!

I get about 3-6 C difference, depending on load

My CPUZ validation is at 3.6, but it runs in the low 60's at that speed, since I fold on this rig 7/24, I usually keep it at 3.2. -- Runs in the mid to high 50's at 3.2.

My idle temps are in the low 30's, but I never seem to leave it idle long...

http://valid.x86-secret.com/show_oc.php?id=393264

what is the vcore and do you have teh Batch? also is it stable at 3.6?

=Digger= · 09-07-08

Quote:

Originally Posted by TrueNoob

what is the vcore and do you have teh Batch? also is it stable at 3.6?

Vcore for 3.6 was 1.275, and no I didn't run Orthos or Prime, but it did pass 3DMark06 at this speed. 3.6 is the highest I could go without BSOD's, hangs or crashes, the cooling in this system is not great, Tt Big typhoon, is on my list for "upgrade soon"

I looked, but I don't have the box anymore, so no I don't have the batch #

TrueNoob · 09-08-08

Quote:

Originally Posted by =Digger=

Vcore for 3.6 was 1.275, and no I didn't run Orthos or Prime, but it did pass 3DMark06 at this speed. 3.6 is the highest I could go without BSOD's, hangs or crashes, the cooling in this system is not great, Tt Big typhoon, is on my list for "upgrade soon"

I looked, but I don't have the box anymore, so no I don't have the batch #

cool cool,. Welcome!