Dantesinferno

I thought 1.36 should no be surpassed?

__________________

decapitator

i meant for that clock. i bet you could go down a little well maybe.

The_Parrot

well im enjoy my q9450 at the moment ha gone froma foxconn mars to a foxconn black ops. on the mars i had 3.6 stable at 1.34v
so far i have had 3.5 stable at 1.28v on the black ops working at 3.6 this board is much harder to tune with as it has so many settings be im getting there. i am enjoying it alot i have a feeling im going to finish up around the 3.8-4ghz mark who knows though i know for a fact ill be higher than 3.6 ha. a good bit higher.

so far 3.6 stable for 5hrs of prime.
1.3cpu v
1.63n/b under water so load is under 40c
1.35vvt

__________________
what is windows 8?

"Well, when two copies of Windows 7 love each other..."
(From Marin had to steel it sorry )

MasterofSepuku

Hello,
I´m new to the club, although i already have my Q9450 for a year. It was an excellent processor till now and i want to keep it that way. My highest OC was 3.5 GHz at a FSB 438, but that was the MAX for my Asus P5Q board. I run now at 3.2 Ghz at a FSB of 400. That way i can run my RAM at 1:1 (DDR2-800 with tighter Timings of 4-4-4-12 instead of 5-5-5-15 at DDR2-1000) and thus optimize it´s performance at comparable low Vcore of 1.144V and Temperatures of 60°C for the Cores and 48°C at the Heatspreader (Intel MAX 71°C). So here it is

Hopefully my my registration for the Intel 9450 Club

1)Name: Masterofsepuku
2)CPU-Z validation: http://valid.canardpc.com/show_oc.php?id=799065
3)CPU Clock Speed: 3,200 MHz
4)CPU Voltages: 1,144 Vcore
5)Stable as depleted Uranium (30 cycles of IntelBurnIn-Test at "Very High" with 4096MB of RAM)
5)Batchnumber: Unknown, i will update when possible

Hey fellows!

MasterofSepuku

jcharlesr75

I have put my name in here once but im not on the list. I'm stable at 3.8 ghz at 1.312v. I finally have provided a screenshot along with my folding progress so you know its working. This rig is stable for weeks at a time(usually when i reboot for good measure). I havent tried to, but im sure that i could lower my vcore and it would still be stable. Instead i was thinking of raising my oc to 4.0 and see if it was stable. I have noticed in the past that the same chip family often works with much different voltages. I use the LLC on my motherboard and i am running at a much lower bios voltage than i was without it. But ultimately 1.36v does indeed seem high to me.

Attached Thumbnails

 

__________________

The_Parrot

now thats what i want to hit im working towards the 4ghz o/c but i think ill end up topping out at 3.8 ish but we shall see. next step is 3.6ghz its all taking its times as the x48 is very finkyy chip set but works great

__________________
what is windows 8?

"Well, when two copies of Windows 7 love each other..."
(From Marin had to steel it sorry )

vicious_fishes

you won't get 8x500. don't kid yourself.

__________________

The_Parrot

do you follow me around or somthingt buddy, really
i dont care about your views said i was trying for not expecting to get it.

__________________
what is windows 8?

"Well, when two copies of Windows 7 love each other..."
(From Marin had to steel it sorry )