high5withknives

Sitting at 3.6 Just want to make sure my voltages are safe... ( in fact, what IS too much?...)

fsb 1600
vcore 1.5
ht 1.48
nb 1.48
sb 1.58

Mattb2e

your vcore is at the maximum you would want to go. What is your temps and what cooler are your running?

__________________
"Being wrong is erroneously associated with failure, when in fact to be proven wrong should be celebrated. For it is elevating someone to a new level of understanding, furthering awareness."

"Always question the recieved reality, the consensus reality is often intentionally misleading"

Thermal Compound Application Instructions:
http://www.arcticsilver.com/arctic_s...structions.htm

Intel E8400 Club

high5withknives

Temps are no problem at all, it gets to 35 max after prime95 running 3 hours... just dont want to mess anything up...

Mattb2e

Is that your cpu or core temps? 35c seems awfully low, are you running watercooling?

__________________
"Being wrong is erroneously associated with failure, when in fact to be proven wrong should be celebrated. For it is elevating someone to a new level of understanding, furthering awareness."

"Always question the recieved reality, the consensus reality is often intentionally misleading"

Thermal Compound Application Instructions:
http://www.arcticsilver.com/arctic_s...structions.htm

Intel E8400 Club

high5withknives

Yeah, using coretemp.. and im on water

Mattb2e

oh ok lol, I was about to say. Those are some pretty good temps.

__________________
"Being wrong is erroneously associated with failure, when in fact to be proven wrong should be celebrated. For it is elevating someone to a new level of understanding, furthering awareness."

"Always question the recieved reality, the consensus reality is often intentionally misleading"

Thermal Compound Application Instructions:
http://www.arcticsilver.com/arctic_s...structions.htm

Intel E8400 Club

high5withknives

I'm trying to get to 4.0 , but unsure how to go about it.

Mattb2e

I know that people go above 1.5v on water but im not sure as to the long term effects of running your voltage that high. You will most definately be able to push 4.0 possibly more out of it but the voltage required to do so might do some damage to your processor in the long run.

__________________
"Being wrong is erroneously associated with failure, when in fact to be proven wrong should be celebrated. For it is elevating someone to a new level of understanding, furthering awareness."

"Always question the recieved reality, the consensus reality is often intentionally misleading"

Thermal Compound Application Instructions:
http://www.arcticsilver.com/arctic_s...structions.htm

Intel E8400 Club

high5withknives

Yeah i want to do it with no damage heh, sitting on 3.6 rock solid though.. idling at 30 degrees, could be lower if i turned the room temp down.

Mattb2e

actually I found that the max vcore is 1.55 so you have a bit more that you can go. but 1.5v is safe I believe, 1.55v is pushing it to the absolute max

__________________
"Being wrong is erroneously associated with failure, when in fact to be proven wrong should be celebrated. For it is elevating someone to a new level of understanding, furthering awareness."

"Always question the recieved reality, the consensus reality is often intentionally misleading"

Thermal Compound Application Instructions:
http://www.arcticsilver.com/arctic_s...structions.htm

Intel E8400 Club