Josh81

not sure if i should run linx until my xigmatek comes in, after 2 minutes i was getting temps of 70 celsius


edit : error after 2:32... zz


how do you know what made your OC unstable with linx theres no error codes (even though i'm 99% sure its the voltage lol)

aquax

I can run prime95 for 10 hours but I fail LinX after 20 minutes, usually failing in LinX is related to low vcore, and your temp is fine, I hit 70c with my TRUE120 in LinX

Josh81

i don't think anything will stress my processor as much as linx


what would you say if i could pass 8+ hours of prime but couldn't pass linx

aquax

Well, I passed 10 hours primes95 but my system wasn't stable, so that's why I went to try LinX and it failed at the same settings which passed 10 hours prime95, I don't trust prime95 much, I usually only use the Large FFT test to make sure my MCH core voltage is ok

Josh81

i'm just gonna stick with 1.28

my mobo is being stupid and now instead of going from 1.28 to 1.264, its going from 1.28 to 1.22 when i go down one notch in voltage

PlUgOuT

I don't know why but my oc passes 100 in LinX but sometimes it fails prime. Does this mean it's not stable?

Lyall

The best stability test is daily usage. When you run LinX how much memory are you using? Try using 2048mb. I don't think you are stressing all of your memory with LinX. You're vcore might be fine but try raising the MCH voltage a notch.

__________________

Quote:

Originally Posted by corky dorkelson Folding does not kill cards. It exposes weaknesses.

_₌=The Q9550 Club=₌_

PlUgOuT

2220mb. That higher then u say. Mine is just a bad bad chip

sirbaili

Here is mine:

Gigabyte EP45-UD3P

Cellshock PC8000 4-4-4-12 2.1V

LLC Enabled

Stable OC 4250 8X500
vCore: 1.376 (1.400 In Bios.


http://valid.canardpc.com/show_oc.php?id=545662

PlUgOuT

Wow that's great. I wanna cry!