|
|
|
#701 (permalink) | ||||||||||||||
|
Overclocker
![]() |
Quote:
__________________
|
||||||||||||||
|
|
|
|
|
#702 (permalink) | |||||||||||||
|
Intel Overclocker
![]() |
Finally i got it 12 Hours stable on Prime for 12 Hours...
here are my pics ![]() ![]() ![]() And here are my settings Code:
MB Intelligent Tweaker(M.I.T.) Robust Graphics Booster ...............: [Auto] or Fast CPU Clock Ratio ..........................: [8x] Fine CPU Clock Ratio.....................:[+0.5] CPU Frequency ...........................:3.82GHz (450X8.5) ********** Clock Chip Control ******** Standard Clock Control CPU Host Clock Control..................: [Enabled] CPU Host Frequency (Mhz) ............: [450] PCI Express Frequency (Mhz) .........:[100] C.I.A.2 .................................:[Disabled] >>>>> Advanced Clock Control Advanced Clock Control [Press Enter] ******** DRAM Performance Control ******** Performance Enhance...................: [Turbo] Extreme Memory Profile (X.M.P.).....: [Auto] (G)MCH Frequency Latch...............: [Auto] System Memory Multiplier (SPD)..............: [2.00D] Memory Frequency (Mhz) 1066..............: 900 DRAM Timing Selectable (SPD)................: [Auto] >>>>> Standard Timing Control CAS Latency Time........................ 5 tRCD ..........................................5 tRP'............................................5 tRAS.......................................... 15 Advanced Timing Control [Press Enter] ****** Motherboard Voltage Control ****** >>> CPU Load-Line Calibration...................[Enabled] CPU Vcore . .........................: 1.250V [1.325V] CPU Termination ..... 1.200V [1.220V] CPU PLL ....1.500V [Manual] CPU Referen. ....0.760V [Auto] >>>MCH/ICH MCH Core .....1.100V [1.320V] MCH Reference . .0.760V [Auto] MCH/DRAM Ref. ......0.900V [Auto] ICH I/O .....1.500V [Auto] ICH Core ... 1.100V [Auto] >>> DRAM DRAM Voltage ....1.800V [2.100V] DRAM Termination . 0.900V [Auto] Channel A Reference 0.900V [Auto] Channel B Reference 0.900V [Auto] ------------------------------------------------------------- Advanced Bios Features Limit CPUID Max. to 3.....................: [Disabled] No-Execute Memory Protect............: [Disabled] CPU Enhanced Halt (C1E)................: [Disabled] C2/C2E State Support....................: [Disabled] x C4/C4E State Support..................: [Disabled] CPU Thermal Monitor 2(TM2) ...........: [Enabled] CPU EIST Function.........................: [Disabled] Virtualization Technology................: [Disabled]
__________________
|
|||||||||||||
|
|
|
|
|
#704 (permalink) | |||||||||||||
|
Intel Overclocker
![]() |
Well it can easily get 4Ghz.. but it will need some time and some settings
__________________
|
|||||||||||||
|
|
|
|
|
#706 (permalink) | |||||||||||||
|
Intel Overclocker
![]() |
cause it took me a long time to get 3.8.. i will go 4Ghz but not now.. i will hold for a while
__________________
|
|||||||||||||
|
|
|
|
|
#708 (permalink) | |||||||||||||
|
4.0 GHz
|
Hello, just boght my new, shiny Q9550, upgrade from Q9450... E0 Steping, 1.34 VID BIOS
Prof -> http://valid.canardpc.com/show_oc.php?id=561266 Testinf stability in this moment, will come back with it when it`s done!!
__________________
Only God can Judge Me...Others are Ignored http://valid.canardpc.com/show_oc.php?id=821822
|
|||||||||||||
|
|
|
|
|
#709 (permalink) | |||||||||||||
|
Intel Overclocker
![]() |
what's your temps ? i am curious to know
__________________
|
|||||||||||||
|
|
|
|
|
#710 (permalink) | |||||||||||||
|
Intel Overclocker
![]() |
cause i am an OC noob and this was my 1st overclock ever and it took me time to understand the whole process...
__________________
|
|||||||||||||
|
|
|