|
|
|
01-23-09
|
#101 (permalink) | ||||||||||||
|
Extreme Cooler
|
So, should I RMA to newegg and get a replacement or just leave it? Because not hitting 4.0ghz is kind of waste of money with this chip.
|
||||||||||||
|
|
|
01-23-09
|
#102 (permalink) | |||||||||||||
|
The Dark Passenger
 
|
With the UD3P it should be a no brainer. Did you try Jor3's template from XS?
__________________
|
|||||||||||||
|
|
|
01-23-09
|
#103 (permalink) | ||||||||||||
|
Extreme Cooler
|
Can you link me Rob?
|
||||||||||||
|
|
|
|
01-23-09
|
#104 (permalink) | |||||||||||||
|
The Dark Passenger
|
Gigabyte EP45 UD3P******
Q9650 489 X 9 4401MHz Robust Graphics Booster.........................[ Auto ] CPU Clock Ratio.................................[ 9 ] Fine CPU Clock Ratio............................[ 0 ] CPU Frequency 4.35GHz...........................[ 489 x 9 ] ******Clock Chip Control****** CPU Host Clock Control..........................[ Enabled ] CPU Host Frequency (Mhz)........................[ 489 ] PCI Express Frequency (Mhz).....................[ 100 ] C.I.A 2 [Disabled] ******Advanced Clock Control****** CPU Clock Drive.................................[ 1000mv ] PCI Express Clock Drive.........................[ 1000mv ] CPU Clock Skew..................................[ 0ps ] MCH Clock Skew..................................[ 50ps ] ******DRAM Performance Control****** Performance Enhance [Standard] Extreme Memory Profile (XMP)....................[ Disabled ] (G) MCH Frequency Latch.........................[ 333MHz ] System Memory Multipler.........................[ 2.40 ] Memory Frequency 1066...........................[ 1174 ] DRAM Timing Selectable..........................[ Manual ] CAS Latency Time................................[ 5 ] tRCD............................................[ 5 ] tRP.............................................[ 5 ] tRAS............................................[ 15 ] ******Advanced Timing Control****** tRRD............................................[ Auto ] tWTR............................................[ Auto ] tWR.............................................[ Auto ] tRFC............................................[ 52 ] tRTP............................................[ Auto ] Command Rate (cmd)..............................[ Auto ] ******Channel A Timing Settings****** Static tRead Value [ 7 ] ................[ 8 ] tRD Phase0 Adjustment [ 0 ] ................[ Auto ] tRD Phase1 Adjustment [ 0 ] ................[ Auto ] tRD Phase2 Adjustment [ 0 ] ................[ Auto ] tRD Phase3 Adjustment [ 0 ] ................[ Auto ] tRD 2rd (Differnt Rank) [ 8 ] ................[ Auto ] tWR 2wr (Differnt Rank) [ 8 ] ................[ Auto ] tWR 2rd (Differnt Rank) [ 7 ] ................[ Auto ] tRD 2wr (Same/Difft Rank) [ 9 ] ................[ Auto ] Dimm 1 Clock Skew Control.......................[ Auto ] Dimm 2 Clock Skew Control.......................[ Auto ] DDR Write Training..............................[ Auto ] ******Channel A Driving Settings****** Drive Strength Profile..........................[ OC-1333 ] Data Driving Pull Up Level......................[ Auto ] cmd Driving Pull Up Level.......................[ Auto ] ctrl Driving Pull Up Level......................[ Auto ] clk Driving Pull Up Level.......................[ Auto ] Data Driving Pull Down Level....................[ Auto ] cmd Driving Pull Down Level.....................[ Auto ] ctrl Driving Pull Down Level....................[ Auto ] clk Driving Pull Down Level.....................[ Auto ] ******Channel B Timing Settings****** Static tRead Value [ 6 ] ................[ 8 ] tRD Phase0 Adjustment [ 0 ] ................[ Auto ] tRD Phase1 Adjustment [ 0 ] ................[ Auto ] tRD Phase2 Adjustment [ 0 ] ................[ Auto ] tRD Phase3 Adjustment [ 0 ] ................[ Auto ] tRD 2rd (Differnt Rank) [ 8 ] ................[ Auto ] tWR 2wr (Differnt Rank) [ 8 ] ................[ Auto ] tWR 2rd (Differnt Rank) [ 7 ] ................[ Auto ] tRD 2wr (Same/Difft Rank) [ 9 ] ................[ Auto ] Dimm 1 Clock Skew Control.......................[ Auto ] Dimm 2 Clock Skew Control.......................[ Auto ] DDR Write Training..............................[ Auto ] ******Channel B Driving Settings****** Drive Strength Profile..........................[ OC-1333 ] Data Driving Pull Up Level......................[ Auto ] cmd Driving Pull Up Level.......................[ Auto ] ctrl Driving Pull Up Level......................[ Auto ] clk Driving Pull Up Level.......................[ Auto ] Data Driving Pull Down Level....................[ Auto ] cmd Driving Pull Down Level.....................[ Auto ] ctrl Driving Pull Down Level....................[ Auto ] clk Driving Pull Down Level.....................[ Auto ] ******Motherboard Voltage Control****** Load-Line Calibration [Enabled] CPU Vcore [ 1.23750 ]...................[ 1.41250 ] CPU Termination [ 1.20 ]...................[ 1.40 ] CPU PLL [ 1.50 ]...................[ 1.570 ] CPU Reference [ 0.766 ]...................[ 0.871 OR 0.886 ] MCH Core [1.1 ]...................[ 1.400 ] MCH Reference [0.760 ]...................[ 0.926 ] MCH/DRAM Refernce [0.900 ]...................[ 1.150 ] ICH I/O [1.500 ]...................[ 1.570 ] ICH Core [1.100 ]...................[ 1.200 ] DRAM Voltage [1.800 ]...................[ 2.300 ] DRAM Termination [0.900 ]...................[ 1.150 ] Channel A Ref [0.900 ]...................[ 1.150 ] Channel B Ref [0.900 ]...................[ 1.150 ] ******Advanced BIOS Features****** CPU Multithreading..............................[ Disabled ] Limit CPUID Max to 3............................[ Disabled ] No-Execute memory Protect.......................[ Disabled ] CPU Enhance Halt (CIE)..........................[ Disabled ] C2/C2E State Support............................[ Disabled ] C4/C4E State Support............................[ Disabled ] CPU Thermal Monitor.............................[ Disabled ] CPU EIST Function...............................[ Disabled ]
|
|||||||||||||
|
|
|
|
01-23-09
|
#105 (permalink) | ||||||||||||
|
Extreme Cooler
|
Those voltages seems to be high for 24/7 usage. I give it a try and if it doesn't work just RMA today and hopefully better chip for RMA
|
||||||||||||
|
|
|
|
01-23-09
|
#106 (permalink) | |||||||||||||
|
The Dark Passenger
|
that is for 4.4ghz mind you.
__________________for 4ghz, less vcore is needed.
|
|||||||||||||
|
|
|
|
01-23-09
|
#107 (permalink) | |||||||||||||
|
The Dark Passenger
|
Ok, here is an hour of orthos without a hiccup.
Next step is 445x9
|
|||||||||||||
|
|
|
|
01-23-09
|
#108 (permalink) | ||||||||||||
|
Extreme Cooler
|
I set it to 1.3625vCore and everything is the same as the setting except the ram I set to 2.00B = 890mhz and run IBT fail less than 20secs.
I just RMA this chip given me hard time OC to 4.0ghz.
|
||||||||||||
|
|
|
|
01-23-09
|
#109 (permalink) | |||||||||||||
|
The Dark Passenger
|
Also 3dmark06 at 3.6, ram at 800mhz, video card at stock.
|
|||||||||||||
|
|
|
|
01-23-09
|
#110 (permalink) | |||||||||||||
|
Extreme Cooler
 
|
WOW!!! I wish I could kiss this chip!!! I have so far passed 5 iterations of the IBT at 3.6Ghz and only 1.2250v in BIOS! Everything else is stock volts, even my FSB!! I am kind of cheating with temps right now because I have my PC tower in the window with cold Winter air blowing right on it. The only core showing actual temps is around 29-33C.
__________________ In Windows with pencil mod on my 780i I am loaded at 1.2240v according to Everest Ultimate.
Last edited by Greg121986 : 01-23-09 at 05:49 PM |
|||||||||||||
|
|
|
