NightQuest

Hey guys i have this E2140 which comes at a stock speed of 1.6GHz, i managed to get it to 2.9GHz stable at these settings:
VCore: 1.45v in BIOS [1.402 in cpuz]
DRAM: 2.110v
HT: 1.36v
NB: 1.40v
SB: 1.52v

I really want to get it to 3GHz but i cant add that 100MHz
Anybody knows what should i change to get the FSB to 1500MHz and boot? when i try 1500MHz the computer freezes when it's supposed to show the windows screen so i have to reset it, it's at 1450MHz now. The motherboard and RAM that i'm using are in my signature. Thanks

gamervivek

i can get 3Ghz stable at 1.38 but 3.2 needs 1.44 and 3.3 is just unstable no matter the voltages and in the similar way you described,so it might be same with you.try finding your fsb wall by dropping down the multi to 6.

__________________
there are only 10 kind of people in this world, those who understand ternary, those who don't, and then those who don't give a damn.

I see in Fight Club the strongest and smartest men who've ever lived. I see all this potential, and I see squandering...

old man look at my life, I'm a lot like you.

Ati Tray Tools vs CCC

razr7

i heard it can get up to 3.6ghz with high voltage. and dry ice

__________________

We Are Gr33n Machine

http://valid.canardpc.com/show_oc.php?id=611561

Core i7
http://valid.canardpc.com/show_oc.php?id=707087

Creative X-Fi XtremeGamer>Logitech Z-640 5.1ch

microman

just pump a **** load of voltage into the cpu. these chips can handle 1.6v 24/7 no problem! SB voltage seems WAY high to me

__________________
BUY MY CAMERA!! free video card with it
http://www.overclock.net/other-techn...d-freebie.html

Miko2323

Stuck at 2.9 Myself.
360 FSB.

Any workaround?

And pumping more than 4.7 volts through it gona make a diference???

umgill45

Umm you sure thats 4.7 volts?

To the OP:
Try lowering your multiplier and increase your FSB to see if there is a hole as someone recommended above me.

Also use CPU-z and tell me what ratio your RAM is running at by clicking the memory tab.
Please make sure the RAM:FSB is 1:1.
Use P95 to test for stability.

What kind of errors are you getting when you go above 2.9 GHZ?

Lower the voltage to default on the SB since looking at your components, its not needed.

__________________



We spend way too much time trying to impress people we don't like, by buying things we don't need, with money we don't have" - Will Smith