paras

i really appreciate the help you guys are giving but the problem is i really dont understand anything about this OC of cpu

can u post a pic of settings coz it will make my work much easier

also can u tell me how much FSB i should put in bios to actaully get a 3.0 Ghz OC

stevenma188

ya it should be 1333Mhz Fsb to get 3.0Ghz (if you leave the multiplier on 9x)

Also, just to make sure, manually set your multiplier on 9x, instead of auto, and turn off all power saving features (ie IntelSpeedStep)

__________________

We Are The Red Tide

I Fold for TEAM 37726

paras

ill desable all the features anything else i should do?

i mean like giving manual timings to ram or anything?

stevenma188

Based on the pics from this site: P5NE-SLI Bios

Go to the Extreme Tweaker page
1. Set AI Tuning to Manual
2. Go to the System Clocks page and set it to 100/100/100/Auto
3. Go to the FSB & Memory Config page and set Unlinked, and set FSB of 1333 and Memory of 800
4. Go to the Overclocking page and set Multiplier to 9, and then set everything else like this
5. Go to the Over Voltage page, and set VCore to 1.40 (and if that works, later you can try slowly reducing it so you don't draw so much power/produce that much heat) and set Memory Voltage to whatever your ram is rated for (you have to be more detailed on the type of ram you have)

See if that works.

__________________

We Are The Red Tide

I Fold for TEAM 37726

stevenma188

you shouldnt need to if you are running your ram at 800Mhz, and it is rated for that. You have to figure out what your ram is rated for in terms of memory timing.

__________________

We Are The Red Tide

I Fold for TEAM 37726

paras

ok tried what u said it didnt work

i also wanna know 1 thing from u guys will it be better to buy a good Mobo with good Ocing ability?

can any1 suggest me a good board sli or not i dont care for under 100$ which is good for OC

GSingh

Your board is fine. What you need to do is set your Vcore to 1.4v and your RAM to it's rated voltage. Then put in 333mhz x 9.

__________________

paras

u mean 1333 x 9 coz it only has FSB option?

GSingh

333 bus speed = 1333QDR so yes.

__________________

paras

ok did what u said still nothing changed the voltage to 1.4 and memory voltage to 1.9 still nothing

i think its time to change the board also my bios version is pretty old coz when i had to reset my bios through cmos the date changed to Jan 1 2007

any help or change mobo?