stevenma188

Maybe try going to the Asus website and updating to the newest bios for your board. Then, maybe try a smaller OC , like 1200 FSB to ge 2.7Ghz.

__________________

We Are The Red Tide

I Fold for TEAM 37726

stevenma188

Also, you might want to check out this thread: http://www.overclock.net/intel-cpus/...p5n-e-sli.html

__________________

We Are The Red Tide

I Fold for TEAM 37726

paras

really this is so technical and i dont understand anything

i just wasted my 100$ on a cooler and now i cant even OC coz of this noob board

can any1 tell me a good OC board for quads for 100-150 $

this is too technical for me so please suggest a board which is really simple in using OC and is widely used for OC

sli or no sli is no problem

FieryCoD

Well, I would suggest this board: http://www.newegg.com/Product/Produc...82E16813128358

It is currently the absolute BEST for overclocking the Q6600 right now, and everybody who has a quad should get this board. But the thing is, you are from India so I do not know the price this board is, so I need you to go find it.

__________________

Blueberry Muffins Ultra-Mega-Group!

　／l、
（ﾟ､ ｡ ７ - Protip Cat says: "Cats do have nine lives."
　l、 ~ヽ
　じしf_, )ノ I love Lights.

flyin15sec

You should go ahead and keep the board, until you figure it out. Many of the things people telling you to try, are what you will have to do, regardless of what 'brand' motherboard you have.

A good overclocking board, will have even more tuning options, so if a 650i is too technical for you then another board, like a UD3P will even confuse you more.

My recommendation is to do the incremental QDR increase, test each time you increase. That way you have more control over the bus speed you've increased and what voltages you may need to increase. This also will be more stable, because an incremental increase will at least boot up, and not just give you a blank screen.

Good luck.

__________________
All My Children:
[E8400@4ghz 1.275v- Biostar TPower i45- 4gig Patriot Viper- TR Ultima 90- EVGA GTX260- Antec 900]
[E6850@3.6ghz 1.425v- Gigabyte EP35-DS3L- 4gig OCZ Fatal1ty- TR Ultima 90- EVGA GTS 250- NZXT Tempest]
[Q9550@3.9ghz 1.33v- Gigabyte EP45-UD3P- 4gig Dominator- Xigmatek S1283- Visiontek HD4850 x2- Antec 900 II]
[Athlon II X2 250@3.6ghz 1.4v- MSI K9A2 CF-F- 4gig OCZ Fatal1ty- TR Ultima 90- Galaxy GTS 250- Antec 300]
[E7300@3ghz 1.15v - Asus P5N-D- 4gig OCZ Fatal1ty- OCZ Vendetta 2- EVGA 8800GTX- Antec P182]

stevenma188

Well said flyin15sec, coudlnt agree with you more.

__________________

We Are The Red Tide

I Fold for TEAM 37726

clbkdaz

Whoa Whoa Whoa....I leave you alone for 24 Hours and you run off and try to shoot 1.9V through your chip.

Look - The board is not the best at overclocking quads, but that doesn't mean you can't enjoy the board. Try small changes and work your way from there. Let's figure out how much of an OC we can really get out of this setup before we go trade it in for something else. You said yesterday that you were going to use it for gaming...even a slight overclock will get you some good results.

Let's 1st get this board back to stock settings. Load the defaults and clear the CMOS so we know we are working with a clean slate. Now lets run a prime run for a little while to make sure the 1.9V electrocution you applied hasn't caused any damage.

Now...lets start making increases at increments of 11 FSB. Each increase should be just about 100Mhz. Let's take this from 267 up to 278 (278 x 9 = 2.5Ghz). Does it boot? Can you run Prime?

If so - then lets kick it up another 11 FSB. Test Again. Let's try and figure out exactly where this board is limiting you.

If you still want to get a new board, that's fine...but I ran a 680i SE SLI for over a year without being able to OC past 2.7GHz and I still loved it.

__________________
Of all the things I miss...I think I miss my mind the most.

losttsol

Yikes. I hope the liquid nitrogen is flowing.

__________________

stevenma188

um...DDR is designed to run with 1.8 - 2.1V, so 1.9 is right in that range, and its safe. wats wrong with that?

__________________

We Are The Red Tide

I Fold for TEAM 37726

clbkdaz

My bad...I thought he meant he raised his Vcore to 1.9V.

__________________
Of all the things I miss...I think I miss my mind the most.