joe2004

i dont know what else to do anymore im going crazy.
here are the settings on GA-EX58-UD3R. i cant find one Guide thats got the correct settings for this board that i can just copy the same settings.

cpu X20
BCKL at 190
Turbo Disabled
Multi T Enabled
cpu enhanced disabled
C3/C6 Disabled
performance standard
qpi tried auto and X36
uncore tried 3800 and lower depending on ram speed
System memory Multi 8 so its at 1520 my ram is XSMS-3 pc 1600
Dram timming auto 8 8 8 24
Dram voltage at 1.64 and tried auto
load live calib Disabled
cpu V core 1.4125
QPI at 1.340
CIA2 Disabled


Please some one help me with this freaking thing before i brake this Cra%.

Thanks guys

i have this settings and it works perfect 24/7

Turbo boost Disabled
the rest enabled
qpi auto
uncore at 3500
BKL at 175
performance Turbo
extream mem Disabled
system mem Mult 8 so its at 1400
Dram timmings auto
load line Disabled
cpu Vcore at 1.33125

so all this works very nice but if i touch the QPI it wont boot it comes back as overclock Failed. for the life of me i dont get it anymore.

if i take the Vcore to 1.4250 during the stress test system reboots itself

Slightly skewed

I hate to say but I have been doing some reading on these x58 Gigabyte boards and they top out at 190blck or 3.9ghz or there abouts. So that right there tells you they aren't the best overclockers. But yours seems to fall just short of the average. I know, I was of no help whatsoever. My advice is to sell that board and get something else.

Can you get any better results with Turbo enabled? Also try a 19x multi.

__________________
[..:Q6600 Club:..] [The "Official" Antec 1200 Club]
[VANTAGE SCORE P34567][Q6600 @ 4.331GHZ]
[i7 920 @ 4.5GHZ]
THE ULTIMATE CRYSIS THREAD!!

Inktfish

Where you got the info that the boards overclock bad?

__________________

Slightly skewed

I did s simple gogle search of UD4P and Extreme reviews as well as a thread search on here. I'm not saying they are terrible, just don't expect 4ghz out of them.

__________________
[..:Q6600 Club:..] [The "Official" Antec 1200 Club]
[VANTAGE SCORE P34567][Q6600 @ 4.331GHZ]
[i7 920 @ 4.5GHZ]
THE ULTIMATE CRYSIS THREAD!!

justin.kerr

nothing wrong with the board. http://valid.canardpc.com/show_oc.php?id=544230

what bios? what batch # on the chip? Some batches are just crap over clockers.

joe2004

i have the F5 Bios and the Chip is the C0/C1 or it may be just C0 is that a bad chip version ? how many version are there ?

thanks

iDShaDoW

I got mine to 3.8GHz easy on stock cooler (GA-EX58-EXTREME) but the temps were obviously pretty high (90-95C in Prime95) so I put everything back to factory default settings.

Just got my TRUE yesterday so I'm gonna give it another go after class.

There are lots of different batches of the C0 chips with some OC'ing better than others. There's also the D0 that people are getting now that supposedly run on lower voltages and OC a bit better but that's still gonna take time to tell for sure.

justin.kerr

what batch # ?
Some batches just do not clock very well.
F6b is the newest bios, for that board, I think, lol.
My other 920 with an Asus P6 board takes a lot of v core to be stable at 3.9Ghz 1.45 in Cpuz.

What is your v core in Cpuz ?
Why disable LLC?
What is your PLL volatge?
try to use odd multi's, 19 or 21

joe2004

ok i checked its C0/C1 thats for sure. Cpu-Z is like 1.392 something like that. How do you get your Mult to 21 ? i cant get higher then 20 ?

should i enable load line Calibration ?

will touching the QPI give me lower Vcore at same OC settings ?. i heard they said you can get the same oc speed with lower Vcore if you up the QPI ? But if i touch that i cant even post


thanks

valtopps

3.8ghz ? whats wrong with that? is that to slow for you????????????????????????????
enjoy your computer

__________________
HERE I IS


E5200 3.6GHZ********** E8600 4.4GHZ ***********Q9650 4GHZ
E7200 3.8GHZ********** Q9450 3.4GHZ
E8400 3.8GHZ********** Q9550 3.8GHZ