|
|
|
 |
Overclock.net - Overclocking.net > Intel > Intel CPUs | |
1.3 VID q9650 Arrrg!!!!!
|
||
 |
|
|
LinkBack | Thread Tools |
05-03-09
|
#1 (permalink) | |||||||||||
|
Overclocker
 
Join Date: Nov 2008
Location: San Jose, California
Posts: 887
Rep: 34
 Unique Rep: 30
Trader Rating: 0
|
1.3 VID q9650 Arrrg!!!!!
 I just got a q9650 off this guy for $200 bucks, and it turns out to be 1.3VID. Oh well, right now at 1.25vcore at stock it hasn't gone above 43C during small ffts. I will try overclocking it. I hope I can get 4ghz without too high volts and temps.Wish me luck, please!!!!
Last edited by lemans81 : 05-03-09 at 07:54 AM |
|||||||||||
|
|
|
05-03-09
|
#2 (permalink) | |||||||||||||
|
Overclocker
 
|
here is luck
I think you can do it... just gotta think positive
__________________
GPU: 4870 OC:http://www.techpowerup.com/gpuz/bcv5x/ Needs and Wants: 5870 $400 and Megahalems $100 Laptop: MacBookPro 2.4Ghz T8300, 8600GT 256MB, 200GB 5400RPM HDD, 4GB RAM, 15.4" 1440x900
|
|||||||||||||
|
|
|
|
05-03-09
|
#3 (permalink) | |||||
|
4.0ghz
 
|
Don't worry man. I run my 1.2375 VID Q9550 at 1.15V 24/7. Just undervolt it.
__________________
Q9550 @ 4.0GHz
|
|||||
|
|
|
05-03-09
|
#4 (permalink) | |||||||||||||
|
Overclocker
Join Date: Apr 2008
Location: Norwich, England
Posts: 2,596
Rep: 120
Unique Rep: 95
Trader Rating: 0
|
My Q6700 has a VID of 1.3v but they can have as much as 1.5volts stuck into them
__________________you should be ok best of luck and keep us posted
|
|||||||||||||
|
|
|
|
05-03-09
|
#5 (permalink) | ||||||||||||||
|
4.0 GHz
Join Date: Feb 2009
Location: Toronto, Ontario
Posts: 1,546
Rep: 87
Unique Rep: 76
Trader Rating: 13
|
yeah, for me the furthest I could undervolt / highest clock was 3.8GHz on 1.18v (my VID is 1.20v)
but I wouldn't doubt that I could undervolt even more with less clock..
__________________
Quote:
|
||||||||||||||
|
|
|
|
05-03-09
|
#6 (permalink) | |||||||||||
|
Overclocker
Join Date: Nov 2008
Location: San Jose, California
Posts: 887
Rep: 34
Unique Rep: 30
Trader Rating: 0
|
Ok, so far so good. I am overclocked to 3.375ghz at 1.23vcore and I have passed 4 minutes of small ffts with a max temp of 45C. I am gonna see if I can push a little futher to 3.5ghz at the same volts. C'mon 4ghz!
__________________
|
|||||||||||
|
|
|
|
05-03-09
|
#7 (permalink) | |||||||||||||||
|
4.0 GHz
Join Date: Feb 2009
Location: Toronto, Ontario
Posts: 1,546
Rep: 87
Unique Rep: 76
Trader Rating: 13
|
Quote:
Try and go as low as you can with vcore and see where it takes you for a 1GHz overclock at 3.8GHz. You may be able to do it with stock volts or lower. After you set it in BIOS, boot back up and do 10 Loops of Intel Burn Test on Maximum. You will know then if it's stable... Oh and don't worry too much about temps -- it's more cpu intensive
__________________
Quote:
|
|||||||||||||||
|
|
|
|
05-03-09
|
#8 (permalink) | |||||||||||
|
New to Overclock.net
|
i got a VID of 1.275 for my Q9550
__________________for 4ghz stable i have to set vcore to 1.425 which vdroops to about 1.342-1.36 or so. Right now im shooting for 3.6ghz @ 1.3v in bios - vdrooping to about 1.232 under load
|
|||||||||||
|
|
|
|
05-03-09
|
#9 (permalink) | ||||||||||||||
|
4.0 GHz
Join Date: Feb 2009
Location: Toronto, Ontario
Posts: 1,546
Rep: 87
Unique Rep: 76
Trader Rating: 13
|
to help with some vdroop try enabling Load Line Calibration.
Just try not to set more than 1.3625v in Windows.. though
__________________
Quote:
|
||||||||||||||
|
|
|
|
05-03-09
|
#10 (permalink) | |||||||||||
|
New to Overclock.net
|
isnt LLC dangerous for 45nm chips? i read that somewhere
__________________
|
|||||||||||
|
|
|
|
| Tags |
| 4ghz, megahalems, q9650 |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
The Foxconn Bloodrage Club 
