Post Your Stable Overclock Settings Here - Overclock.net

Ramzinho · 05-06-09

Hi Guys as overclocking can be tricky for new people and i'm one of them and it took me a while to get my 3.8 Stable. i spent 7 days to get that now and i won't move to 4.0GHz now.. i will just sit back and enjoy this for a while.

So i thought we can All post our overclocked In detail settings so it would be like a library of Settings for new comers and as a reference for ourselves.

Of course not exact same settings will work for everyone but Imagine we have like 20 settings for Q6600 or Q9550 @ like 3.4GHz 3.8GHz it would be a great point to help people know where to start From.

I'll start with my self as i had a 12 hour stable Blend test with prime on this 3.82 Ghz (450x8.5) so here is my settings

CPU: Q9550
Stepping: E0
Batch#: L844B736

Bios Settings:

Code:

MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster ...............: [Auto] or Fast
CPU Clock Ratio ..........................: [8x]
Fine CPU Clock Ratio.....................:[+0.5]
CPU Frequency ...........................:3.82GHz (450X8.5)


********** Clock Chip Control ********
 
Standard Clock Control
CPU Host Clock Control..................: [Enabled] 
CPU Host Frequency (Mhz) ............: [450]
PCI Express Frequency (Mhz) .........:[100]
C.I.A.2 .................................:[Disabled]

>>>>>  Advanced Clock Control

Advanced Clock Control [Press Enter]


******** DRAM Performance Control ********

Performance Enhance...................: [Turbo]
Extreme Memory Profile (X.M.P.).....: [Auto]
(G)MCH Frequency Latch...............: [Auto]
System Memory Multiplier (SPD)..............: [2.00D]
Memory Frequency (Mhz)  1066..............:   900
DRAM Timing Selectable (SPD)................: [Auto]

>>>>> Standard Timing Control
CAS Latency Time........................ 5
tRCD ..........................................5
tRP'............................................5 
tRAS.......................................... 15

Advanced Timing Control     [Press Enter]

****** Motherboard Voltage Control ******
>>> CPU

Load-Line Calibration...................[Enabled]
CPU Vcore….……….........................: 1.250V [1.325V]
CPU Termination…..... 1.200V [1.220V]
CPU PLL…………………....1.500V [Manual]
CPU Referen.…………....0.760V [Auto]

>>>MCH/ICH

MCH Core…………….....1.100V [1.320V]
MCH Reference….…….0.760V [Auto]
MCH/DRAM Ref.…......0.900V [Auto]
ICH I/O……………….....1.500V [Auto]
ICH Core…………...……1.100V [Auto]

>>> DRAM
DRAM Voltage ……....1.800V [2.100V] 
DRAM Termination .…0.900V [Auto]
Channel A Reference 0.900V [Auto]
Channel B Reference 0.900V [Auto]

-------------------------------------------------------------
Advanced Bios Features

Limit CPUID Max. to 3.....................: [Disabled]
No-Execute Memory Protect............: [Disabled]
CPU Enhanced Halt (C1E)................: [Disabled]
C2/C2E State Support....................: [Disabled]
x C4/C4E State Support..................: [Disabled]
CPU Thermal Monitor 2(TM2) ...........: [Enabled]
CPU EIST Function.........................: [Disabled]
Virtualization Technology................: [Disabled]

I am collecting Bios templates and adding them to attachments so you can guys download them and fill em out then post them.

Please if you post settings validate your OC with CPU-Z and if you can post a picture for your prime test it would be great.

Cheers everybody hope you like the idea

Ramzinho · 05-06-09

[Update May 8th 2009]

Gigabyte Boards:
EP45-UD3P

Acoma_Andy: Intel E8400 C0-Q815A 3.77Ghz @ 1.32v
Josh81: Intel Q9550 @ 4.0 1.23v
freakb18c1:Intel Q9550@ 4.0 GHz 1.20V
grishkathefool: Intel E8400 @ 4005MHz 1.35V

---------------------------------------------

Asus Boards:
Asus P5E3 x38

Prong: Intel Q9400@ 3.44 GHz

---------------------------------------------

Asus P5Q Deluxe

gurusan:Intel E8500 @4.5 GHz 1.36V

---------------------------------------------

ASUS, P6T Deluxe V2

jtravapd:Intel i7 965 @ 4GHz

MSI p7n sli platinum

bittbull187: Intel E8400 E0 4.0ghz@1.23v

---------------------------------------------

EVGA 750i ftw

savagerobot: Q9400 @ 3GHz 1.1875V

Acoma_Andy · 05-06-09

Ok I'm gonna do this by head and fill some other settings in later:

Code:

MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster ...............: [Auto] 
CPU Clock Ratio ..........................: [8x]
Fine CPU Clock Ratio.....................:[+0.0]
CPU Frequency ...........................:3.76GHz (471X8)


********** Clock Chip Control ********
 
Standard Clock Control
CPU Host Clock Control..................: [Enabled] 
CPU Host Frequency (Mhz) ............: [471]
PCI Express Frequency (Mhz) .........:[100]
C.I.A.2 .................................:[Disabled]

>>>>>  Advanced Clock Control

Advanced Clock Control [Press Enter]


******** DRAM Performance Control ********

Performance Enhance...................: [Turbo]
Extreme Memory Profile (X.M.P.).....: [Disabled]
(G)MCH Frequency Latch...............: [333]
System Memory Multiplier (SPD)..............: [2.40B]
Memory Frequency (Mhz)  1066..............:   1130
DRAM Timing Selectable (SPD)................: [Manual]

>>>>> Standard Timing Control
CAS Latency Time........................ 5
tRCD ..........................................5
tRP'............................................5 
tRAS.......................................... 15

Advanced Timing Control     [Press Enter]

****** Motherboard Voltage Control ******
>>> CPU

Load-Line Calibration...................[Disabled]
CPU Vcore….……….........................: 1.2250V [1.36250V]
CPU Termination…..... 1.200V [1.260V]
CPU PLL…………………....1.500V [1.5V]
CPU Referen.…………....0.760V [To be filled in later]

>>>MCH/ICH

MCH Core…………….....1.100V [1.280V]
MCH Reference….…….0.760V [To be filled in later]
MCH/DRAM Ref.…......0.900V [0.96V]
ICH I/O……………….....1.500V [Normal]
ICH Core…………...……1.100V [Normal]

>>> DRAM
DRAM Voltage ……....1.800V [1.920V] 
DRAM Termination .…0.900V [0.96V]
Channel A Reference 0.900V [0.96V]
Channel B Reference 0.900V [0.96V]

-------------------------------------------------------------
Advanced Bios Features

Limit CPUID Max. to 3.....................: [Disabled]
No-Execute Memory Protect............: [Disabled]
CPU Enhanced Halt (C1E)................: [Disabled]
C2/C2E State Support....................: [Disabled]
x C4/C4E State Support..................: [Disabled]
CPU Thermal Monitor 2(TM2) ...........: [Enabled]
CPU EIST Function.........................: [Disabled]
Virtualization Technology................: [Disabled]

Ramzinho · 05-06-09

Thanks Andy and when you are Done let me know.. I will Do sorting in the Reserved topic to keep this thread updated

Prong · 05-06-09

How do you do this ? I mean how do you post your detailed bios settings in a framed window...

Ramzinho · 05-06-09

Quote:

Originally Posted by Prong

How do you do this ? I mean how do you post your detailed bios settings in a framed window...

just paste them and before it write [code#] and after it's Done write [/code]

Remove the (#) as i hads to write it down

Prong · 05-06-09

Quote:

Originally Posted by Ramzinho

just paste them and before it write [code#] and after it's Done write [/code]

Remove the (#) as i hads to write it down

Actually I was trying to ask if there is any software in windows that would let you extract and save your bios settings in .txt format.

So first you write them down to notepad manually and then paste them here with these code tags ?

Thanks for the info.