Pentium Dual-Core E6300 (2.8G, 1066)!! - Page 8 - Overclock.net

RabidHamster · 09-02-09

Just thought I would share my experience with the E6300.

System:

Antec Sonata III
ASUS P5Q Pro Turbo
Intel E6300 with AC Freezer 7 pro
Mushkin XP2-8500 4 GB
Seagate 1 TB HD
LG DVDRW
Creative Audigy SE 7.1
Sapphire Tech 4870 1 GB with AC Twin Turbo running at 825 / 1025. (750 / 900 stock)

I have the CPU running @ 4.0 GHZ (400 x 10), mem set at stock 1066, vcore @ 1.35V, mem @ 2.0V. Computer runs 100% stable.

The computer is pretty much silent except for when the CPU is loaded, but even then the Freezer 7 Pro is pretty quiet, and I can't tell anyway because if it ever has to ramp up it's because i'm gaming and wouldn't be able to hear the CPU fan over the speakers anyway

I set the AC twin turbo fans @ 75%, which as far as I can tell is almost silent.

Prime95 after 15 minutes, CPU runs at 69 degrees.
Prime95 for 1 hour, CPU runs at 70 degrees.
After running the ATI cube for 15 minutes, GPU hits a max of 60.
After running the ATI cube for 1 hour, GPU hits a max of 62.

When i'm playing a game, I haven't seen the CPU go over 65, or GPU go over 57. Perfectly acceptable in my world!

All in all I would say the E6300 is a pretty sweet little chip!

Enigma8750 · 09-02-09

That is part of the Wolfdale Family so the Voltage should be close to the brothers.

Here you are.

* Wolfdale 45 nm process technology
o Intel Pentium E5400 - 2.70 GHz (2MB L2,800 MHz FSB)
o Intel Pentium E5300 - 2.60 GHz (2MB L2,800 MHz FSB)
o Intel Pentium E5200 - 2.50 GHz (2MB L2,800 MHz FSB)
o Intel Pentium E6300 - 2.80 GHz (2MB L2,1066 MHz FSB)

SavageSS · 09-12-09

Hi All
First time here. Seems most active with details on the new E6300 which I have. I can't get mine to be stable at 3.8Ghz let alone going to 4Ghz. I suspect it could be my memory setting but not the best at all the deatails with overclocking.

I'm running a Gigabyte Mobo with F9 bios. Can someone look at my settings and tell me what I need to change. It seems if I change my DRAM Multiplier it won't boot unless on Auto?

Pentium Dual-Core E6300 (2.8G, 1066)!!-e6300.jpg

BIOS F9
MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster ...............: Auto
CPU Clock Ratio .............................: 10X
Fine CPU Clock Ratio......................: 0
CPU Frequency ..............................: 3.75 Ghz

Clock Chip Control
Standard Clock Control
CPU Host Clock Control.....................: [Enabled]
CPU Host Frequency (Mhz) ..............: 375
PCI Express Frequency (Mhz) ..........: Auto
C.I.A.2........................................... ...: Disabled

Advanced Clock Control [Press Enter]
CPU Clock Drive...............................: 800mV
PCI Express Clock Drive...................: 900mV
CPU Clock Skew (ps)........................: 0ps
MCH Clock Skew (ps)........................: 0ps

DRAM Performance Control
Performance Enhance.......................: [STANDARD]
(G)MCH Frequency Latch...................: Auto
System Memory Multiplier (SPD)........: Auto
Memory Frequency (Mhz) .................: 800 1125
DRAM Timing Selectable (Auto)..........: [Manual]
Standard Timing Control
CAS Latency Time.............................. 5 Auto
tRCD ................................................. 5 Auto
tRP'.............................................. ...... 5 Auto
tRAS.............................................. .... 18 Auto
Advanced Timing Control [Press Enter]
tRRD.............................................. .... 3 - Auto
tWTR.............................................. ... 3 - Auto
tWR............................................... .... 6 - Auto
tRFC.............................................. .... 52 - Auto
tRTP.............................................. .... 3 - Auto
Command Rate (CMD) .....................:0 - Auto
Channel A
Channel A Timing Settings (Press Enter)
Channel A Driving Settings (Press Enter)
All on Auto
Channel B
Same as Channel A
CPU
Load-Line Calibration......................: Disabled
CPU Vcore….………...........................: 1.50000V
CPU Termination…..... 1.200V.........: Auto
CPU PLL…………………....1.500V........: Auto
CPU Reference………....0.760V........: Auto
MCH/ICH
MCH Core…………….....1.100V...........: 1.200V
MCH Reference….…….0.760V...........; Auto
MCH/DRAM Ref.….....0.900V............: Auto
ICH I/O……………….....1.500V............: Auto
ICH Core…………….....1.100V............: Auto
DRAM
DRAM Voltage ……....1.800V.............: 2.080V
DRAM Termination .…0.900V............: Auto
Channel A Reference 0.900V............: Auto
Channel B Reference 0.900V............: Auto
Advanced Settings
Limit CPUID Max. to 3......................: [Disabled]
No-Execute Memory Protect............: [Enabled]
CPU Enhanced Halt (C1E)................: [Disabled]
C2/C2E State Support.....................: [Disabled]
C2/C4E State Support.....................: [Disabled]
CPU Thermal Monitor 2(TM2) ..........: [Enabled]
CPU EIST Function...........................: [Disabled]

Devilywan88 · 09-13-09

Quote:

Originally Posted by SavageSS

Hi All
First time here. Seems most active with details on the new E6300 which I have. I can't get mine to be stable at 3.8Ghz let alone going to 4Ghz. I suspect it could be my memory setting but not the best at all the deatails with overclocking.

I'm running a Gigabyte Mobo with F9 bios. Can someone look at my settings and tell me what I need to change. It seems if I change my DRAM Multiplier it won't boot unless on Auto?
Attachment 122994

BIOS F9
MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster ...............: Auto
CPU Clock Ratio .............................: 10X
Fine CPU Clock Ratio......................: 0
CPU Frequency ..............................: 3.75 Ghz

Clock Chip Control
Standard Clock Control
CPU Host Clock Control.....................: [Enabled]
CPU Host Frequency (Mhz) ..............: 375
PCI Express Frequency (Mhz) ..........: Auto
C.I.A.2........................................... ...: Disabled

Advanced Clock Control [Press Enter]
CPU Clock Drive...............................: 800mV
PCI Express Clock Drive...................: 900mV
CPU Clock Skew (ps)........................: 0ps
MCH Clock Skew (ps)........................: 0ps

DRAM Performance Control
Performance Enhance.......................: [STANDARD]
(G)MCH Frequency Latch...................: Auto
System Memory Multiplier (SPD)........: Auto
Memory Frequency (Mhz) .................: 800 1125
DRAM Timing Selectable (Auto)..........: [Manual]
Standard Timing Control
CAS Latency Time.............................. 5 Auto
tRCD ................................................. 5 Auto
tRP'.............................................. ...... 5 Auto
tRAS.............................................. .... 18 Auto
Advanced Timing Control [Press Enter]
tRRD.............................................. .... 3 - Auto
tWTR.............................................. ... 3 - Auto
tWR............................................... .... 6 - Auto
tRFC.............................................. .... 52 - Auto
tRTP.............................................. .... 3 - Auto
Command Rate (CMD) .....................:0 - Auto
Channel A
Channel A Timing Settings (Press Enter)
Channel A Driving Settings (Press Enter)
All on Auto
Channel B
Same as Channel A
CPU
Load-Line Calibration......................: Disabled
CPU Vcore….………...........................: 1.50000V
CPU Termination…..... 1.200V.........: Auto
CPU PLL…………………....1.500V........: Auto
CPU Reference………....0.760V........: Auto
MCH/ICH
MCH Core…………….....1.100V...........: 1.200V
MCH Reference….…….0.760V...........; Auto
MCH/DRAM Ref.….....0.900V............: Auto
ICH I/O……………….....1.500V............: Auto
ICH Core…………….....1.100V............: Auto
DRAM
DRAM Voltage ……....1.800V.............: 2.080V
DRAM Termination .…0.900V............: Auto
Channel A Reference 0.900V............: Auto
Channel B Reference 0.900V............: Auto
Advanced Settings
Limit CPUID Max. to 3......................: [Disabled]
No-Execute Memory Protect............: [Enabled]
CPU Enhanced Halt (C1E)................: [Disabled]
C2/C2E State Support.....................: [Disabled]
C2/C4E State Support.....................: [Disabled]
CPU Thermal Monitor 2(TM2) ..........: [Enabled]
CPU EIST Function...........................: [Disabled]

your voltage are pretty high for a dual core chip..what's temp ur getting with that vcore?
here's my setting as for your reference;

E6300@3.8ghz@1.328v , 362x10.5

Pentium Dual-Core E6300 (2.8G, 1066)!!-linx_e6300-3.8ghz-true_black.jpg

Devilywan88 · 09-13-09

deleted

SavageSS · 09-13-09

Thanks,
I've printed out your info, see how I go.
My temps are around 40C and 38C.
Running a Noctua Cooller on the chip and using an Armor +MX case which has decent cooling itself..

almighty15 · 09-13-09

I'm killing my Pentium E6300

SavageSS · 09-13-09

Alright. So all I really done was lower the Voltage (VCore) and instead of Auto for the Advanced Timing Control [Press Enter], I set this manually to what it was on auto.

Set CPU speed to 3.8Ghz and booted no probs, tried 3.88 no issues and ran fine for the whole day. Will bump it up again!.

man from atlantis · 09-30-09

http://valid.canardpc.com/show_oc.php?id=729928

420x10.5 4410 mhz @ 1.72V

and still works

.. i did wprime 4m got something like 17,5 s but then suddenly blue screen.. it was 99 and 96 C cores temps..

i got sunbeam ccf and daily it runs @ 3.8 ghz 380x10 1.392v

..

Halos · 2 Weeks Ago

Quote:

Originally Posted by man from atlantis

http://valid.canardpc.com/show_oc.php?id=729928

420x10.5 4410 mhz @ 1.72V

and still works

.. i did wprime 4m got something like 17,5 s but then suddenly blue screen.. it was 99 and 96 C cores temps..

i got sunbeam ccf and daily it runs @ 3.8 ghz 380x10 1.392v

..

pff

4830 @1.68v

http://valid.canardpc.com/show_oc.php?id=812525

And it wasnt hit and run, i was in windows quite a while. It was worked on water +ice ice baby

Super PI 1M: E6300 @ 4.7GHZ - 11.937s

09-02-09	#71 (permalink)
RabidHamster New to Overclock.net Join Date: Sep 2009 Posts: 1 Rep: 0 Unique Rep: 0 Trader Rating: 0	Just thought I would share my experience with the E6300. System: Antec Sonata III ASUS P5Q Pro Turbo Intel E6300 with AC Freezer 7 pro Mushkin XP2-8500 4 GB Seagate 1 TB HD LG DVDRW Creative Audigy SE 7.1 Sapphire Tech 4870 1 GB with AC Twin Turbo running at 825 / 1025. (750 / 900 stock) I have the CPU running @ 4.0 GHZ (400 x 10), mem set at stock 1066, vcore @ 1.35V, mem @ 2.0V. Computer runs 100% stable. The computer is pretty much silent except for when the CPU is loaded, but even then the Freezer 7 Pro is pretty quiet, and I can't tell anyway because if it ever has to ramp up it's because i'm gaming and wouldn't be able to hear the CPU fan over the speakers anyway I set the AC twin turbo fans @ 75%, which as far as I can tell is almost silent. Prime95 after 15 minutes, CPU runs at 69 degrees. Prime95 for 1 hour, CPU runs at 70 degrees. After running the ATI cube for 15 minutes, GPU hits a max of 60. After running the ATI cube for 1 hour, GPU hits a max of 62. When i'm playing a game, I haven't seen the CPU go over 65, or GPU go over 57. Perfectly acceptable in my world! All in all I would say the E6300 is a pretty sweet little chip! Last edited by RabidHamster : 09-02-09 at 11:58 PM

09-12-09	#73 (permalink)
SavageSS New to Overclock.net Join Date: Sep 2009 Posts: 3 Rep: 0 Unique Rep: 0 Trader Rating: 0	Hi All First time here. Seems most active with details on the new E6300 which I have. I can't get mine to be stable at 3.8Ghz let alone going to 4Ghz. I suspect it could be my memory setting but not the best at all the deatails with overclocking. I'm running a Gigabyte Mobo with F9 bios. Can someone look at my settings and tell me what I need to change. It seems if I change my DRAM Multiplier it won't boot unless on Auto? BIOS F9 MB Intelligent Tweaker(M.I.T.) Robust Graphics Booster ...............: Auto CPU Clock Ratio .............................: 10X Fine CPU Clock Ratio......................: 0 CPU Frequency ..............................: 3.75 Ghz Clock Chip Control Standard Clock Control CPU Host Clock Control.....................: [Enabled] CPU Host Frequency (Mhz) ..............: 375 PCI Express Frequency (Mhz) ..........: Auto C.I.A.2........................................... ...: Disabled Advanced Clock Control [Press Enter] CPU Clock Drive...............................: 800mV PCI Express Clock Drive...................: 900mV CPU Clock Skew (ps)........................: 0ps MCH Clock Skew (ps)........................: 0ps DRAM Performance Control Performance Enhance.......................: [STANDARD] (G)MCH Frequency Latch...................: Auto System Memory Multiplier (SPD)........: Auto Memory Frequency (Mhz) .................: 800 1125 DRAM Timing Selectable (Auto)..........: [Manual] Standard Timing Control CAS Latency Time.............................. 5 Auto tRCD ................................................. 5 Auto tRP'.............................................. ...... 5 Auto tRAS.............................................. .... 18 Auto Advanced Timing Control [Press Enter] tRRD.............................................. .... 3 - Auto tWTR.............................................. ... 3 - Auto tWR............................................... .... 6 - Auto tRFC.............................................. .... 52 - Auto tRTP.............................................. .... 3 - Auto Command Rate (CMD) .....................:0 - Auto Channel A Channel A Timing Settings (Press Enter) Channel A Driving Settings (Press Enter) All on Auto Channel B Same as Channel A CPU Load-Line Calibration......................: Disabled CPU Vcore….………...........................: 1.50000V CPU Termination…..... 1.200V.........: Auto CPU PLL…………………....1.500V........: Auto CPU Reference………....0.760V........: Auto MCH/ICH MCH Core…………….....1.100V...........: 1.200V MCH Reference….…….0.760V...........; Auto MCH/DRAM Ref.….....0.900V............: Auto ICH I/O……………….....1.500V............: Auto ICH Core…………….....1.100V............: Auto DRAM DRAM Voltage ……....1.800V.............: 2.080V DRAM Termination .…0.900V............: Auto Channel A Reference 0.900V............: Auto Channel B Reference 0.900V............: Auto Advanced Settings Limit CPUID Max. to 3......................: [Disabled] No-Execute Memory Protect............: [Enabled] CPU Enhanced Halt (C1E)................: [Disabled] C2/C2E State Support.....................: [Disabled] C2/C4E State Support.....................: [Disabled] CPU Thermal Monitor 2(TM2) ..........: [Enabled] CPU EIST Function...........................: [Disabled]

09-13-09	#76 (permalink)
SavageSS New to Overclock.net Join Date: Sep 2009 Posts: 3 Rep: 0 Unique Rep: 0 Trader Rating: 0	Thanks, I've printed out your info, see how I go. My temps are around 40C and 38C. Running a Noctua Cooller on the chip and using an Armor +MX case which has decent cooling itself.. Last edited by SavageSS : 09-13-09 at 09:40 PM

		Overclock.net - Overclocking.net > Intel > Intel CPUs
Pentium Dual-Core E6300 (2.8G, 1066)!!

09-13-09	#78 (permalink)
SavageSS New to Overclock.net Join Date: Sep 2009 Posts: 3 Rep: 0 Unique Rep: 0 Trader Rating: 0	Alright. So all I really done was lower the Voltage (VCore) and instead of Auto for the Advanced Timing Control [Press Enter], I set this manually to what it was on auto. Set CPU speed to 3.8Ghz and booted no probs, tried 3.88 no issues and ran fine for the whole day. Will bump it up again!.

09-30-09	#79 (permalink)
man from atlantis New to Overclock.net Join Date: Sep 2009 Posts: 2 Rep: 0 Unique Rep: 0 Trader Rating: 0	http://valid.canardpc.com/show_oc.php?id=729928 420x10.5 4410 mhz @ 1.72V and still works .. i did wprime 4m got something like 17,5 s but then suddenly blue screen.. it was 99 and 96 C cores temps.. i got sunbeam ccf and daily it runs @ 3.8 ghz 380x10 1.392v ..

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)