|
|
|
#11 (permalink) | |||||||||||||
|
4.0 GHz
![]() |
Ah right I see, just have to hope for the best when I get overclocking
__________________
|
|||||||||||||
|
|
|
|
|
#12 (permalink) | |||||||||||||
|
New to Overclock.net
|
I'm gonna see what it will do with 1.3vcore.i maybe ok for 4.2/3ghz i guess,depends on the temps.
This is at 1.26vcore- ![]() I'll test and see if its stable ish,and run it at this if it is ok. EDIT-it runs super pi,now to try 3dmark06.
Last edited by TI66ER : 06-24-09 at 09:06 AM Reason: added pi pic |
|||||||||||||
|
|
|
|
|
#13 (permalink) | |||||||||||||
|
Intel Overclocker
|
i havent done too much testing but one thing i can say for sure is that beyond 4.35ghz the cpu requires a substantial jump in voltage to remain stable.
__________________
http://valid.canardpc.com/show_oc.php?id=590493 ::: The Intel E8600 Club ::: The "Official" Antec 1200 Club :::
|
|||||||||||||
|
|
|
|
|
#14 (permalink) | |||||||||||||
|
New to Overclock.net
|
I'm upto 1.275v now at 4.3,i'm just edging it up a bit at a time,to find the lowest vcore it will run 4.3ghz at.
Whats your vcore at for 4.3ghz? I think i found my 24/7 oc.Its seemingly fine at 430fsb/4.3ghz at 1.275v.It passed on 3dmark06,but failed at 1.26v on 06.I'll let it run and see what its like. Max temps were both cores at 53c with them loaded 100%.
Last edited by TI66ER : 06-24-09 at 09:37 AM Reason: added comments |
|||||||||||||
|
|
|
|
|
#15 (permalink) | ||||||||||||||
|
4.0 GHz
![]() |
Quote:
__________________
|
||||||||||||||
|
|
|
|
|
#16 (permalink) | |||||||||||||
|
New to Overclock.net
|
I was expecting it to fail immiediatly,but it never.I dont really want to leave it for long during the day,as i need to use it,but it passed for nealy 5mins.I know its not long,but i need to use it.
![]() The vcore went up from an indicated 1.24v to 1.26v.The max temps were about 58/9c on each core.
|
|||||||||||||
|
|
|
|
|
#17 (permalink) | |||||||||||||
|
Intel Overclocker
|
those temps are high for that low a vcore, considering you have water, i would say itz actually too high
check my temp graphs with 1.3 vcore: ![]() ![]()
__________________
http://valid.canardpc.com/show_oc.php?id=590493 ::: The Intel E8600 Club ::: The "Official" Antec 1200 Club :::
Last edited by LFX : 06-24-09 at 12:20 PM |
|||||||||||||
|
|
|
|
|
#18 (permalink) | |||||||||||||
|
New to Overclock.net
|
So why would my temps be so high? I'm at 39c on widows at 1.2vcore/4ghz.
|
|||||||||||||
|
|
|
|
|
#19 (permalink) | |||||||||||||
|
Intel Overclocker
|
its probably your mounting, i cannot say for sure, don't have any experience with watercooling
__________________
http://valid.canardpc.com/show_oc.php?id=590493 ::: The Intel E8600 Club ::: The "Official" Antec 1200 Club :::
|
|||||||||||||
|
|
|
|
|
#20 (permalink) | |||||||||||||
|
Overclocker
![]() |
Lt.JD 4.5Ghz 1.25v ????
sig for proof
__________________
GPU: 4870 OC:http://www.techpowerup.com/gpuz/bcv5x/ Needs and Wants: 5870 $400 and Megahalems $100 Laptop: MacBookPro 2.4Ghz T8300, 8600GT 256MB, 200GB 5400RPM HDD, 4GB RAM, 15.4" 1440x900
|
|||||||||||||
|
|
|
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|