peterg60

hi all just joined site today hope some 1 can help me get stable at 4ghz with my system all info is listed at bottom what i have done so far cheers

can boot into windows but orthos test will stop after 7 mins


Robust Graphics Booster ...............: [Auto]
CPU Clock Ratio .......................: [ 9]
Fine CPU Clock Ratio...................: +0.0
CPU Frequency .........................: 4GHz

Clock Chip Control
Standard Clock Control
CPU[ Host Clock Control.................: [Enabled]
CPU Host Frequency (Mhz) ..............: 450Mhz
PCI Express Frequency (Mhz) ...........: 100

C.I.A.2 ...............................: [Disabled]

Advanced Clock Control [Press Enter]
CPU Clock Drive........................: 800mV
PCI Express Clock Drive................: 900mV
CPU Clock Skew (ps)....................: 0ps
MCH Clock Skew (ps)....................: 0ps

DRAM Performance Control
Performance[/URL] Enhance....................: [STANDARD]
Extreme Memory Profile (X.M.P.)........: [Disabled]
(G)MCH Frequency Latch.................: Auto
System Memory Multiplier ..............: 2.00D
Memory Frequency (Mhz) ................: 801
DRAM Timing Selectable ................: [Manual]

Standard Timing Control
CAS Latency Time.......................: 5
tRCD ..................................: 5
tRP'...................................: 5
tRAS...................................: 15

Advanced Timing Control
tRRD...................................: auto
tWTR...................................: auto
tWR....................................: auto
tRFC...................................: auto
tRTP...................................: auto
Command Rate (CMD) ....................: auto

Driving Strength Profiles
Driving Strength ......................: [Auto]

Channel A
Static tRead Value.....................: 7--10
tRD Phase0 Adjustment..................: [Auto]
tRD Phase1 Adjustment..................: [Auto]
tRD Phase2 Adjustment .................: [Auto]
tRD Phase3 Adjustment..................: [Auto]

Trd2rd(Different Rank).................: [Auto]
Twr2wr(Different Rank).................: [Auto]
Twr2rd(Different Rank).................: [Auto]
Trd2wr(Same/Diff Rank).................: [Auto]

Dimm1 Clock Skew Control...............: [Auto]
Dimm2 Clock Skew Control...............: [Auto]
DDR Write Training.....................: [Auto]

Channel B
Static tRead Value.....................: 7---10
tRD Phase0 Adjustment..................: [Auto]
tRD Phase1 Adjustment..................: [Auto]
tRD Phase2 Adjustment .................: [Auto]
tRD Phase3 Adjustment..................: [Auto]

Trd2rd(Different Rank).................: [Auto]
Twr2wr(Different Rank).................: [Auto]
Twr2rd(Different Rank).................: [Auto]
Trd2wr(Same/Diff Rank).................: [Auto]

Dimm1 Clock Skew Control...............: [Auto]
Dimm2 Clock Skew Control...............: [Auto]
DDR Write Training.....................: [Auto]

Motherboard Voltage Control
Voltage Type...........................: [Manual]

CPU---------------------Normal-----------Current

Load Line Calibration..................: [Disabled]
CPU Vcore...............1.30000V.......: 1.42500V--showing 1.392v in cpu-z
CPU Termination.........1.200V.........: 1.200V
CPU PLL.................1.500V.........: 1.500V
CPU Reference...........0.760V.........: [Auto]

MCH/ICH
MCH Core................1.100V.........: 1.3200v
MCH Reference...........0.760V.........: [Auto]
MCH/DRAM Reference......0.900V.........: [Auto]
ICH I/O.................1.500V.........: 1.500V
ICH Core................1.100V.........: 1.100V

DRAM
DRAM Voltage............1.800V.........: 2.100V
DRAM Termination........0.900V.........: [Auto]
Channel A Reference.....0.900V.........: [Auto]
Channel B Reference.....0.900V.........: [Auto]

Advanced Settings
Limit CPUID Max. to 3..................: [Disabled]
No-Execute Memory Protect..............: [Enabled]
CPU Enhanced Halt (C1E)................: [Disabled]
C2/C2E State Support...................: [Disabled]
x C4/C4E State Support.................: [Disabled]
CPU Thermal Monitor 2(TM2) ............: [Enabled]
CPU EIST Function......................: [Disabled]
]Virtualization Technology[/URL]..............: [Enabled]

Integrated Peripherals
Legacy USB Storage Detect .............: [Disabled]

can any one suggest how i can get stable thanks

Kingston HyperX 4GB (2x2GB) DDR2 8500C5 1066MHz Dual Channe


- Power supply : Vdd: 1.8V ± 0.1V, Vddq: 1.8V ± 0.1V
- Double-data-rate architecture; two data transfers per clock cycle
- Bidirectional data strobe(DQS)
- Differential clock inputs(CK and CK)
- DLL aligns DQ and DQS transition with CK transition
- Programmable Read latency 5 (clock)
- Burst Length: 4, 8 (Interleave/nibble sequential)
- Programmable Burst type (sequential & interleave)
- Timing Reference: 5-5-5-18 at +1.8V / 5-5-5-15 at +2.2V
- Edge aligned data output, center aligned data input
- Auto & Self refresh, 7.8us refresh interval (8K/64ms refresh)
- Serial presence detect with EEPROM
- High Performance Heat Spreader
- PCB : Height 1.180” (30.00mm), double sided compone

Arakasi

too much vcore Come down to 1.37 or lower for 24/7 usage on a 45nm.

your ram might be holding you back on stability.

you can probably go up a little on mch core as well, maybe closer to 1.4

Oh and according to your manufacturer you need 2.2v to run at 5-5-5-15
On your ram. So DRAM voltage change from 2.1 -> 2.2

Hope some of this helps you out.

__________________
q9650(4.12-OC) 3dmark06 20k
I FOLD, DO YOU ?
Iphone Problems? Toss me a PM.

peterg60

got any advice on setting for my ram windows load but when i run orthos it will stop about 7 mins

Arakasi

Yeah on your ram go up another notch on voltage if your running 5-5-15

__________________
q9650(4.12-OC) 3dmark06 20k
I FOLD, DO YOU ?
Iphone Problems? Toss me a PM.

peterg60

ok will try and report back thanks

peterg60

my pc wont boot to windows at 1.4000 vcore it wants more

peterg60

my heads getting baffeled now been trying for last 2 weeks i know chips are differnt but my seems hungry for vcore i swear lol

peterg60

also i can see option in bios with this llc any sugestion somebody help me please i need 4ghz for my gaming im gutted

morph

You should start playing with MCH reference and VTT. Try lowering MCH reference to .74 .72 or even .70. Also try increasing VTT a few notches, one at a time then test for stability.
To set MCH reference correctly, you first set VTT (CPU Termination) to 1.2V. Then you lower MCH reference to the desired level (let's say .72) then up the VTT to let's say 1.26V. You will see MCH reference will scale up with the changes you make to VTT. Don't worry, that's what is supposed to be.

conami

Lower your processor's voltage down to 1.3625V and set memory timings to 5-5-5-18. FSB termination voltage up to 1.30V. Set your NB voltage to 1.20V and if needed, SB too. Leave your memory voltage to 2.10V.