everett4

Please read 2 above this...


I just stopped the test after 1.5 hrs. As soon as everything coold down, the Core speed and multipliers went back up to 3600x9 this just isnt right. the c1e and others are disabled... it doesnt make sense why it is doing the opposite... iam going to the bios now to read over.. anyone have any suggestions?

heathmcabee

That is weird, cause after disabling those options you should not be dropping under any condition. I'd head back to bios and look for any other options that look to contain something like those options. Hopefully someone with taht mobo can help you more


Try disabling cpu spread spectrum also

__________________
90% of statistics are made up, and 50% of them aren't true.

X1L3D

You have something to do with thermal throttling or load throttling enabled in your bios go through your bios and just disable EVERYTHING that has to do with cpu cause almost none of it is even needed and make sure your vcore isn't on auto as mentioned above. If it is still throttling down then try a clear CMOS and re-overclock it.

__________________
My case re-wire, case mod, and new motherboard.

We Are Gr33n Machine

everett4

Both of you were on the right page of the BIOS i think.. i just went over EVERYTHING. and took the time to make sure the right things were changed.. all the reading i have done, i have noticed NO one that has my board has mentioned that the Multiplier option is not in the same place as most of the ASUS bios.. (the ai tweaker)

apparently, Multiplier option is in the same area (ADVANCED) as the c1e, and thermal throttleing. just named CPu CORE.. ( i think i am in windows now) it is the first option. and - + is the way to change it from AUTO to 6 7 8 or 9. No other forum or post or search had an answer for me.. it was because of u two above me that i found it. (not directly, but it was)

so thank you.. going to test again.. see if it drops.. will post back..

everett4

nope dropped again

everett4

stopped and back up to 3600x9

aleiro

do you have the epu enabled? That is something only asus mobos come with. Set your multiplier to 9 in the bios, and set thermal throttling ON or you could burn up the cpu. It has no effect on the multi, just the frequency of the cpu

__________________
From some other site in reference to OCing from CMH

everett4

Well, i got it locked in now.. testing and holding. I actually haad to turn the CPU TM Off (i had to look up what it was exactly) that is what some of u are refering to as the Thermal Throttleing. (i was looking for that, not TM) anyways its off.. the test is running right now and staying.. Heck i even dropped my CoveC down to 1.375 and she is running nice so far.. as for Aleiro, the Thermal throttling is going back on after the test.. I am watching the Temperatures of all 4 cores and gpu(not relative but) i have my alarms set at 75, and i dropped my TJ down to 80 for saftey reasons. again, as soon as this test is over and i am stable TM is going back on..

I want to tank everyone for their input. I will post again if i have any problems, and i will confirm if everything is good after this test.

X1L3D

Your welcome glad you fixed your problem

__________________
My case re-wire, case mod, and new motherboard.

We Are Gr33n Machine