everett4

OK, i havent done a stress test fully yet.

I had it started with 4 workers. and curiousity came into play.

I opened up my CPUZ and saw that it was down to 2400 core speed (when i am idle it is at 3600 x 9 buss speed 400 Rated fsb 1600, Core volt is 1.408)

ok so again, when the test (prime 95) was running i saw that the speed was down to 2400x6 *** is up with that? and how can i correct it, or is it normal.

I would rather know now b4 i start my 6 hour test. is it supposed to drop the speed and multi's? or should i stay (my thoughts is it should stay but i am noob so i need help)

Juggalo23451

pls fill out your specs here so we can assist you more

__________________
So you want to water cool vid
Water Cooled Case suggestions
Cosmos S w/Classified water cooled(1st) w/ heatkiller and feser 360 rad
NZXT Tempest mod log(360 installed) (Fiance Build)
Founder of the Heatkiller Club
NZXT Tempest User Community
Xbox 360 mods thread
http://www.overclock.net/xbox/435678...dders-out.html

everett4

updated

everett4

also is that huge Heatsink with the fan pulling the heat out, and the on blowing cool in a good cooling system for my CPU?

everett4

bump

everett4

can anyone tell me if it is normal for it to drop 1200 in the core speed while the test is going on? or do i need to up something? and if so, what and by how much? (i am assuming voltage somewhere)

everett4

Ok , so i have kinda moved on a little bit, since i dont like not doing anything.

So i started the prime95 test again with Realtemp running as a partner. I am at heat up phase 40% temperature is 56 57 52 52 (core 1 2 3 4 ) BUT the Core speed dropped again to 2400 x 6, everything else is the same.

i love answering my own questions. WWW. is a great thing

http://gameandtechreviews.wordpress....erclock-guide/

heathmcabee

disable anything in your bios containing c1e thermal throttling or speedstep. Cpuz should then show the correct speed without clocking down your cpu to save power.

and please wait 24 hours before bumping your own thread. People need time to respond.

Also I would go to your vcore and specify your own settings. When left on auto it will jump substantially.

__________________
90% of statistics are made up, and 50% of them aren't true.

everett4

But heres the thing. C1e and te other one are disabled.. the thing is. this is running backwards. on idle i am 3600 x9. under load i am 2400 x6, this isnt supposed to be, this is completely backwards. I am under FULL load as we speak, and it is running 2400x6 that is how it is supposed to run on idle. not under load.. so why would it do Powersaving underload and not idle???????? i am so confused.. its been 5 hours of this. i finally thought it was stable when i finally saw it at 3600 x9 400 1600 @ 1.424 CoreV, ( i think the Voltage can actually come down on the core) but is this the powersaving still?? i only disabled the two i was told to b4

everett4

termperatures now after an hour are 69 69 65 65, they hit 70 (core 1 and 2) for about 10 seconds then dropped. seems to be avg about 68c