Help OC'ing my i7 to 4ghz. BIOS template inside - Overclock.net

noahmateen1234 · 07-10-09

Mother Board ( EVGA X58 Classified E-760 )
Drivers ( )
Bios ( IDK where can I find it? )
CPU ( 920 C0 )
CPU Cooler ( Megahalem )
Memory ( OCZ Gold 1600mhz 8-8-8-24 )
PSU ( Zalman 850w )
GPU ( XFX 4890 XXX )
Drivers ( 9.6 )
Operating System ( Windows Vista 64 )

Frequency Control
CPU Clock Ratio ( 20X )
CPU Host Frequency (Mhz) ( 200 )
MCH Strap ( Auto )
CPU Uncore Frequency (Mhz) ( Auto )
CPU Clock Skew ( 0 ps )
Spread Spectrum ( Disabled )
PCIE Frequency (Mhz) ( 100 )

Memory Feature
Memory Speed ( Standard )
Memory Control Setting ( Enabled )
Memory Frequency ( 1067mhz 2:8 )
Channel Interleave Setting ( 6 Way )
Rank Interleave Setting ( 4 Way )
Memory Low Gap ( Auto )
tCL Setting ( 8 )
tRCD Setting ( 8 )
tRP Setting ( 8 )
tRAS Setting ( 24 )
tRFC Setting ( 74 )
Command Rate ( 1t )

Voltage Control
EVGA VDroop Control ( Without VDroop )
CPU VCore ( 1.35 )
CPU VTT Voltage ( +300 )
CPU PLL VCore ( Auto )
**IOH PLL VCore ( Auto )
DIMM Voltage ( 1.65 )
DIMM DQ Vref ( Don't have this option )
QPI PLL VCore ( 1.425 )
IOH VCore ( Auto )
IOH/ICH I/O Voltage ( Auto )
**VTT PWM Frequency ( 250 KHZ )
**CPU PWM Frequency ( 800 KHZ )
**CPU Impedance ( Auto )
**QPI Signal Compensation ( Auto )
ICH VCore ( Auto )

CPU Feature
Intel SpeedStep ( Disabled )
Turbo Mode Function ( Disabled )
CxE Function ( Disabled )
Execute Disable Bit ( Enabled )
Virtualization Technology ( Disabled )
Intel HT Technology ( Enabled )
Active Processor Cores ( All )
QPI Control Settings ( Enabled )
QPI Link Fast Mode ( Enabled )
QPI Frequency Selection ( Auto )
OC Recorvery ( Don't have this option )

My comp starts up, no video, and I hear the gpu fan spin up to 100%, then slow down, then the comp restarts and does this over, but this time it stays on but no video still. I see my LED display on the mobo says "FF"

BTW, I get video on stock speeds, so I know no hardware is defective.

ltulod · 07-10-09

you have other pc to test the video card?

TurboTurtle · 07-10-09

This is something like the problem I was having when I was trying to push my RAM a bit further. No video, constant restart, etc...

For kicks, set your DRAM timings to Auto, and see what timings it sets your RAM to. If you manually set it to 8-8-8-24, it may be that it's just too tight - I.E. it's not even posting. (I'm assuming that by no video you mean you don't even see a POST screen).

When I did that, it set my timings just a touch looser and everything booted fine. 9-9-9-24 I think is what it set to.

noahmateen1234 · 07-10-09

My video card works fine. If I turn all the BIOS to normal, then my comp works perfectly fine.

I will try the ram things now.

		Overclock.net - Overclocking.net > Intel > Intel CPUs
Help OC'ing my i7 to 4ghz. BIOS template inside

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)