alex98uk

I'm undervolting my laptop and the minute with RM Clock Utility. It has a Intel Core Duo LV L2900 CPU (2.0ghz). Firstly, this CPU doesn't seem to exist in Intel's world, so I can't find any info on it anywhere.

Secondly, opening RM utility shows that all multipliers are set to the VID of 1.2375v. However, I can see in coretemp, when it backs down to 6x multiplier, it goes to a 0.95v voltage, however this is not shown in RM Clock. So, I manually set it to 0.95v in RM.

I see there are lots of multipliers between 6x-15x, all selected. But as far as I know, my CPU only uses 15x at full whack and 6x when held back. So is it safe to disable all the other multipliers?

__________________
Winamp FLAC > Xonar D2 > Optical Zero DAC > Little Dot MKIII > Sony MDR XB700

British Overclockers Club

sizeak

I wouldn't advise it, if its anything like my lappy then it steps the multiplier up gradually depending on the workload, rather than just min and max.

__________________
shame on us
doomed from the start
may god have mercy
on our dirty little hearts
shame on us
for all we've done
and all we ever were
just zeros and ones

alex98uk

I have looked at mine and all it uses is 6x and 15x, nothing in between.

Anyway, 6x is set to 0.95v and 15x I have down from 1.2375v to 1.20v passing LinX

__________________
Winamp FLAC > Xonar D2 > Optical Zero DAC > Little Dot MKIII > Sony MDR XB700

British Overclockers Club