icarusdown

^^
15c on air wuht?
you got you're box outside or something?
or you leave the window open all night while it idle lol.

__________________
'The Althusserian scholar gave his copy of Lacan's "Ecrits" to the abortion doctor.'

Br0k3nLiNk

Nah, i dont understand myself why it is 15C... its sat on my desk the opposite side of the room from any windows... and all the windows were shut XD

I guess my ambient temperature must be around 15C cos it is pretty cold here most of the time. Need to find a thermometer and i shall add my ambient temperature in

icarusdown

15c is ~ 60f, which means your room is colder than that. that's pretty chilly for inside your house. lol.

i read somewhere that the sensors are not entirely reliable at idle anyways. they are calibrated for higher temps cause it's at load where it really matters.

__________________
'The Althusserian scholar gave his copy of Lacan's "Ecrits" to the abortion doctor.'

Br0k3nLiNk

Found out the ambient of my room this morning was 13C and my processor was on a lowest tempertature today of 16C again. I think its about time my mum actually turned the heating on!! It had never dawned on me that for my temps to be that low the house must have been pretty cold :P

My sensors are accurate, i have a little LCD thing from my mates old computer case that is sat inside my computer... It has a sensor that sits between the Processor and the HS, that always displays the same Temp as Everest and HWMPro

pastienot

Processor Model Core 2 Duo E6550
CPU Clock Speed 3.11
CPU Bus Speed 1775.5
CPU Multiplier Setting 7
CPU Core Model Conroe
CPU week/stepping B
CPU Voltage 1.3
Ram DDR2 4GB Patriot
Motherboard Asus P5Q Pro
Cooling Thermaltake Sonic Tower
Dividers 5-5-5-15
Stepping/Revision GO

and for a processor i paid £56 for you can't complain!!!!

now....

Attached Thumbnails

   

__________________

Don't eat all the pies

Lord Xeb

http://valid.canardpc.com/show_oc.php?id=500924



Cooling: XIGMATEK HDT-S1283 in Antec 300 case, 4 fans (both stock and 2 120 in the front)


Super PI



Intel Burn Test



I know that the intel burn test was from an earlier time, but it was on the same day (today) right before I had to go to work. If need be, I will run it again but on 50 with the clock and everything to prove it is stable.

DeX

CPU : Core 2 Duo E8500
Clock Speed : 4.2Ghz
FSB : 1772Mhz
Multiplier : 9.5x
Core Model : Wolfdale (45 nm)
Stepping/Revision : A/E0
Voltage : CPU-Z = 1.232v / BIOS = 1.35v
Motherboard : Asus P5N-T Deluxe
Cooling : D-Tek Fuzion CPU Block, Swiftech Dual Radiator
RAM : X2 2GB DDRII 800mhz A-Data (4GB Total)
SuperPI : 11.310s

CPU-Z Validation

__________________

tbates1244

Processor Model - Intel Core 2 Quad Q6600 G0 Revision *lapped*
Max VIDD - 1.25v
CPU Clock Speed - 3.60Ghz
CPU Bus Speed - 400Mhz
CPU Multiplier Setting - X9
Rated FSB - 1600Mhz
Core Model - Kentsfield
CPU Voltage - 1.487 BIOS (load-line calibration off) 1.408v Loaded
Motherboard - Asus P5Q-E
RAM Type/Size - Kingston HyperX PC2-8500 2x1Gig
RAM Speed - 1066Mhz
RAM Divider (FSBRAM) - 5:6
Cooling - SunbeamTech Core Contact Freezer *lapped* with 120mm Scythe 130cfm
Case - Antec900
Batch#/Stepping/Revision - #L816A279/B/G0

I've done 12 hours but didn't think to get a screeny. So I just let it run for 2 hours.
This is my first rig and second overclock. Pretty good for a $95 -$100 mobo and $180 CPU. I was very impressed with them both.
Also, the second pic shows my Super Pi result I didn't want to run it while I was stressing all four cores in P95.

EDIT: Forgot my CPUZ link and screen here ya go. http://valid.canardpc.com/show_oc.php?id=520044 I'v also since turned of the Load Line calibration and slightly droped my vcore.

Attached Thumbnails

     

__________________

We Are Gr33n Machine

Good....Bad.....I'm the guy with the gun.
~Bruce Campbell in "Army of Darkness"

MakubeX

• Processor model: Core 2 Quad Q9650
• CPU clock speed: 4.2GHz
• CPU Bus/Bclk/QPI speed: 1868MHz
• CPU multiplier setting: 9x
• CPU core model: Yorkfield
• CPU batch/stepping: Batch L822B363, E0 revision
• CPU voltage: 1.328V
• Motherboard model: Asus P5Q Deluxe
• Cooling: EK Supreme block, Thermochill PA120.3 rad
• RAM size/model: 4GB G.Skill PI DDR2-1100
• RAM speed: DDR2-1120
• SuperPI result (1M): - 11.15s

Masuwata

__________________
Hey if I was able to help you with your problem, I don't mind if you help me with my problems. Rep is just a number. But I also want to get a flame

3.4ghz Stable
http://i10.photobucket.com/albums/a1...4Ghz145SPP.jpg