|
|
|
#511 (permalink) | |||||||||||||
|
4.0 GHz
|
the 19 second super pi was ran while running prime Ill post another after Im done running occt.
__________________
GIVE CREDIT WHERE CREDIT IS DUE ![]()
|
|||||||||||||
|
|
|
|
|
#512 (permalink) | |||||||||
|
New to Overclock.net
|
Kentsfield Q6600 G0 VID 1.2875v
3.807Ghz (423x9) Vcore 1.456v Gigabyte GA-EP45-UD3P rev. 1.1 CPU Cooler - Xigmatek hdt-s1283 with bracket, Case Cooling - 3x120mm, 1x200mm Patriot Viper 4GB (2x2GB) DDR2 800 Super Pi - 13.672s
|
|||||||||
|
|
|
|
|
#513 (permalink) | ||||||||||||||
|
Intel oc'er in training
![]() |
![]() • Processor model: Q6600 • CPU clock speed 3.24GHz • CPU Bus/Bclk speed: 360MHz • CPU multiplier setting: 9x • CPU core model: Kentsfield • CPU batch/stepping: L835A G0 • CPU voltage: 1.288v load (Idle: 1.312v) • Motherboard model: Asus P5E Deluxe, BIOS 105 • Cooling: AIR - Zalman CNPS9500 LED • RAM size/model: GEiL PC2-6400 (2x2GB) • RAM speed: DDR2 720 • SuperPI result (1M): 16.458s
__________________
Quote:
|
||||||||||||||
|
|
|
|
#514 (permalink) | |||||||||||||
|
Intel Overclocker
![]() |
• Processor model: E5300
• CPU clock speed: 3.83Ghz • CPU multiplier setting: 11.5x • CPU core model: Wolfdale • CPU batch/stepping: SLB9U, R0 • CPU voltage: 1.420V • Motherboard model: Gigabyte EP35-DS3L • Cooling: Zalman 9500 • RAM size/model: 8GB G-Skill DDR2-1066 • RAM speed: DDR2-1066 • SuperPI result (1M): 14.524s (I can put up a p95 run if you want it.)
__________________
|
|||||||||||||
|
|
|
|
|
#515 (permalink) | |||||||||||||
|
Intel Overclocker
|
![]() • Processor model: E7400 • CPU clock speed: 3.4Ghz • CPU multiplier setting: 8.5x FSB: 400mhz • CPU core model: Wolfdale • CPU batch/stepping: NoPackage, R0 • CPU voltage: 1.32V @ bios • Motherboard model: Gigabyte EP35-DS3L F10 • Cooling: STOCK! • RAM size/model: 4GB Kingston HyperX@400FSBx2 4-4-4-12 1.95v • RAM speed: DDR2-800 • SuperPI result (1M): 15.192s
__________________
E7400 3.6ghz (9x400 1600 rated FSB) on Noctua 9dB stable 10 Intelliburn tmp:MAX 55C Kingston DDR2 HyperX 4-4-3-11@800mhz (2xFSB) Gigabyte EP45-DS3L@4x400FSB 1600 rated
Last edited by GnarusLeo : 04-03-09 at 12:12 PM Reason: HyperPI sucked, SuperPI gave me better results =) |
|||||||||||||
|
|
|
|
|
#516 (permalink) | |||||||||||||
|
News Fiend
|
Cpu: Core i7 920
BCLK: 181 Multi: 21x HT: On Batch 3841A/C0 Voltage: 1.3375 in bios Ram Multi: 8x @ 1448mhz Motherboard: Gigabyte EX58-UD4P Cooling is a lapped TRUE Super Pi 1M: 18.253 during prime, 10.842 after prime First pic is during prime95 and second is right after.
|
|||||||||||||
|
|
|
|
|
#517 (permalink) | |||||||||||||
|
PC Gamer
|
ok from what i can tell this is all the information needed
• Processor model: Intel C2D E8500 • CPU clock speed: 4.20Ghz • CPU Bus/Bclk speed: 442.5Mhz • CPU multiplier setting: 9.5 • CPU core model: Wolfdale • CPU batch/stepping: Q837A078 / E0 • CPU voltage: in bios as 1.325 , CPU-z Reports as 1.392 to 1.424 • Motherboard model: ASUS P5N-E SLI • CPU Cooling: Thermaltake Big Typhoon VX, Max fan speed • RAM size/model: 2GB G.Skill PK DDR2-800 • RAM speed: DDR2-800 running @ 885Mhz • SuperPI result (1M): 11.437s i used Intelburntest at max stress and 5 tests, as far as i can tell thats right? if needed i can take another screenshot because the one ive got is a little while after the test becuas ei had forgotten about super pi at the time, so i had to get everything in the same screenshot i have also tried repeated amounts of times to validate super pi with different calculations and times, but the website keeps throwing invalid checksum at me ![]() Validated CPU-z : http://valid.canardpc.com/show_oc.php?id=540189 on a side note, i just got this cpu yesterday, and LOVING IT! ive actually gotten super pi down to 11.078 but it was unstable, stable @ 11.084
Last edited by go_roko : 04-07-09 at 07:39 AM |
|||||||||||||
|
|
|
|
|
#518 (permalink) | ||||||||||
|
New to Overclock.net
|
• Processor model: Intel Core i7 920
• CPU clock speed: 3.52GHz • Hyperthreading: On • CPU Bclk speed: 168Hz • CPU multiplier setting: 21x • CPU core model: Bloomfield • CPU batch/stepping: 3838A, C0 • CPU voltage: 1.288V • Motherboard model: X58 MSI Platinum SLI • Cooling: COOLER MASTER Hyper N 520 RR-920-N520-GP 92mm Sleeve CPU Cooler • RAM size/model: 6GB OCZ Gold DDR3-1600(OCZ3G1600LV6GK) • RAM speed: DDR3-1336 • SuperPI result (1M): 11.750s
|
||||||||||
|
|
|
|
|
#519 (permalink) | |||||||||||
|
Security Sleuth
|
great useful thread thanks everyone.
![]() much appreciated!
__________________
"A good computer is nothing but a lousy computer with better parts."
|
|||||||||||
|
|
|
|
|
#520 (permalink) | |||||||||||
|
4.0 GHz
![]() |
• Processor model: E6300
• CPU clock speed: 3.00 ghz • CPU Bus/Bclk speed: 500 • CPU multiplier setting: 6 • CPU core model: Conroe • CPU batch/stepping: B2 • CPU voltage: 1.392 • Motherboard model: Gigabyte EP45T-DS3R • CPU Cooling: Rosewill RCX-Z4 • RAM size/model: 4x1 OCZ Reaper DDR3 • RAM speed: DDR3-1333 • SuperPI result (1M): 21s
|
|||||||||||
|
|
|
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|