cowboyzkickazz

validation I got even higher today... I believe this is as high as i can go on air prime95 stable.

Attached Thumbnails

 

__________________
Member of the 4.0GHz club! Pentium 4 630 @ 4.13GHz & PD 940 @ 4.5GHz
3GHz + CPU's: E6300 @ 3.5 GHz & Xeon - X3210 @ 3.61 GHz
Member of Team Owners - 1st to hit 200k
Member of Team Owners - 1st to hit 250k

gtpuser

Pentium D 930
4.3 Ghz Stable max load temps at 65c idle at 45c
Vcore is set in bios to 1.51 after voltage drop it is 1.42
http://valid.x86-secret.com/show_oc?id=97986

Attached Thumbnails

 

__________________
Xeon 3110 @ 4.1Ghz + 4870 3Dmark06 Results
3DMark06 15,685

jonathonparker

I sucessfully overclocked my celeron prescott cpu. I know it's nothing special but its a very stable overclock. At idle my temps are around 30c and at full load they run about 42-45c, acording to mb monitor. I'm not an expert but is that good? Anyways there is my overclock plz enjoy.

Oh yea almost forgot here is the validation link to cpuz
http://valid.x86-secret.com/show_oc.php?id=97946

The Prime screenshot is attached.
Also I ran the Prime 95 test for 8hrs so its very stable.

Attached Images

p2.bmp (151.2 KB, 36 views)

ericaster

http://valid.x86-secret.com/show_oc.php?id=97979

turbocharged

and this is on the stock cooling? what are your temps?

*I would have PM'd him but he doesn't have enough posts and whatnot to reply to my PM.

__________________
Current Systems: Big Gaming Rig (specs below) | Samsung N120 (Ubuntu 9.04 Netbook Remix/Windows XP Dual-Boot) | PS3
Next project: Custom Case for a Mini-ITX Atom/ION System

CrackClocker

Uh... guys i overclocked my pentium 3.0ghz to 3.75ghz and the temps are still the same "30 celsius" i didnt raise the vcore voltage and my pc has been stable for 2 days now, is this a good thing?

The_Manual

If your computer has been stable for 2 days then I would expect it to be fine
However a 750MHz jump without any extra voltage is possible but unlikely, if its stable then fine but I would still consider slightly adjusting the voltage just incase.


I am back this weekend so I will update the thread on Saturday

__________________
I will be sufficiently rewarded if when telling it to others you will not claim the discovery as your own, but will say it was mine.

Fold for team 37726

Please Keep Spelling and Grammar Acceptable

hostage67

I run my intel 640(3.2ghz) at 4.0ghz on stock voltage without any problems, that's an 800mhz overclock. I'll run some dual prime95 stress testing overnight so I have a valid screenshot for you guys but it's rock stable at those speeds without any problems at all. I can push it up to 4.4ghz but that requires a little more voltage and raises the temps enough so that I can't really stress test it at that level (though everything appears to be fine).

I need to create my sig with my current rig information and everything on it, I just joined this site today because for some reason my other overclocking site can't be hit from work now. My D940 arrives tomorrow as well so I'll be doing a little testing and comparison between the two once that arrives .

Rouboute

Intel P4 630 3Ghz @ 4010.14 MHz
Freq : 268FB
15X Multiplier
Prescott
1.425
Abit AW8 Max 3rd Eye II
Arctic Freezer 7 Pro with MX1
1:1
33.578 (Pic Enclosed)

25 Ambient Room, Full load temp of 48C

Attached Thumbnails

   

CrackClocker

I overclocked my 3.0 to 3.75 and got it stabled at least i think, im a newbie at this. I got the cpu-z verified and i just turned on prime95 and let it run for 8 hours.

Attached Thumbnails

   

__________________

Spray Painted Lian Li
Intel Wolfdale E8400 4.50ghz
Intel Pentium E2180 3.73ghz
8800gs+AcceleroX1 Mod
X-Fi Xtrememusic+LM4562 Mod