Inquisitor

Well, I went for it. On tuesday I ordered my e6300, a DS3, and 1gb of g.skill HZ. I have to say, I am very impressed!

Lets have a look at this baby at stock:



Then I started overclocking:


But it Kept going:



Now I am 3.2 Dual prime stable:


Needless to say, I am very impressed with the performance of this ram, chip and mobo.

My voltage settings are as followed:
Cpu: 1.325
Ram: +.04
FSB: +01
VMCH: +01

The ram has hit 1000mhz at 4-4-4-8 (haven't played with it much)

Oh and my bios is the F3.

*edit* I'd like to thank Zero hour and Slade surfer for the memory timing help.

PLEASE NOTE: to get into the extra ram options you must press ctrl + F1 on the main bios screen.

I'll be posting Other benches here too, including all the 3d marks, am3, pcmark. If you want to see any more benches give me a link.

Aquamark 3

__________________

zerohour

Excellent results, and you haven't even pumped the voltage up yet! I am so excited to see what mine can do. I would like to see some AQ3 personally, and Super PI 32mb.

__________________

ZH's Conroe Build Log and Overclocking Thread - PICS!

JBD1986

Wow nice! Cant wait to see what ill be able to push out of an e6700 :P

__________________

zerohour

Depends on your motherboard mostly, because every motherboard maxes out in the same general FSB area.

BTW Inquis, the DS3 maxes at around 470-495, so pump that thing up

__________________

ZH's Conroe Build Log and Overclocking Thread - PICS!

Inquisitor

hmm so it might be my fsb limiting my overclock eh? Any idea on max fsb voltage I can put in there?

__________________

sladesurfer

wow, 486 FSB. My $300 ASUS cant even past 420 FSB

zerohour

Possibly. The lower multi of the E6300 is really holding you back. On a E6400 you would be running 486*8 = 3.88ghz

What voltage are you talking about for your max? Vcore or what?

__________________

ZH's Conroe Build Log and Overclocking Thread - PICS!

Inquisitor

Well, on the ds3 you can up the FSB voltage as well as the vmch. I wonder if this would help my overclock.

Btw, I put up some Am3.

*Edit*
@ Slade surfer... I'm sorry. I feel a little bit bad for you. Overclocking power is comming back to us cheap skates.

__________________

JBD1986

that super pi score is amazing, mine is 36secs right now

__________________

zerohour

Have you even hit a wall yet? I would up the FSB voltage 1 notch for starters. I also think Gigabyte has a Vendor Support section on XS.org where it may be good to ask about max for FSB Voltage, because to be honest I don't know what the MAX is...However upping is 1 or 2 notches shouldn't cause drastic temperature changes or anything like that, so keep upping that FSB, and when you hit a wall, take that FSB voltage up 1, maybe your Vdimm, I don't know what it's running right now.

If you hit a 500FSB with that, you are a God, so go for it!

__________________

ZH's Conroe Build Log and Overclocking Thread - PICS!