Domenico

im new to all this overclocking stuff and i downloaded the intel guide by No_Affinity and i pressed Del when system startup and followed the instructions and i cannot find where to swithf from auto to manual so i can get access to the CPU freq, CPU voltage etc.........i need help

Lando95

Moved to the Intel section.


Welcome to the forums Domenico! Can you please fill out your profile specs so we can see your system. It's much easier to help if we know what we are dealing with . Go to the User Control Panel, which is in the top left corner of the main page, right below the Overclock.net logo.

Now, did you hit the "del" key many times right after your pressed the power button? You have to hit it a few times. Also, it might be possible that your motherboard will not allow overclocking. We will not know that till we know your system specs.

__________________
Main Rig:3.4E @ 4.15ghz, P5WD2, X1900XTX, 2X512 Corsair PC8000UL, Raptors Raid 0, OCZ Powerstream 520.
Rig #2: (folding 24/7)
2.8E @ 3.22, IS7, BFG 6800 Ultra, 2X512 Geil PC4000, 60GB Maxtor, Aspire 500 watt.
Rig #3: (folding 24/7 @ 75%)
2.6B @2.9, IC7, 9800XT, 2X256 Corsair PC3200, 120GB WD, Aspire 500 watt.
Fold for Overclock.net!

Domenico

How can i found out what motherboard i got i tried looking in device manager but no luck there

Inspire

CPU-Z Look under the mainboard tab.
Everest
PC Wizard 2005

__________________

Lando95

Download this quick and simple program. It's called CPU-Z. All it does is tell you information about your hardware. Once you install it, take a screenshot with the CPU tab and the Mainboard tab.

__________________
Main Rig:3.4E @ 4.15ghz, P5WD2, X1900XTX, 2X512 Corsair PC8000UL, Raptors Raid 0, OCZ Powerstream 520.
Rig #2: (folding 24/7)
2.8E @ 3.22, IS7, BFG 6800 Ultra, 2X512 Geil PC4000, 60GB Maxtor, Aspire 500 watt.
Rig #3: (folding 24/7 @ 75%)
2.6B @2.9, IC7, 9800XT, 2X256 Corsair PC3200, 120GB WD, Aspire 500 watt.
Fold for Overclock.net!

Domenico

do you have an emial addy i can send the pic too because it is easier to just send them both at the same time

Lando95

You have to put the images url inbetween the brackets.

Or just save the pic as a JPEG and add it to your post as an attachment. When you make a reply, scroll down to the bottom and click on Manage Attachments. Then just browse to where your picture is stored and click upload. Close the screen and you are good to go.

__________________
Main Rig:3.4E @ 4.15ghz, P5WD2, X1900XTX, 2X512 Corsair PC8000UL, Raptors Raid 0, OCZ Powerstream 520.
Rig #2: (folding 24/7)
2.8E @ 3.22, IS7, BFG 6800 Ultra, 2X512 Geil PC4000, 60GB Maxtor, Aspire 500 watt.
Rig #3: (folding 24/7 @ 75%)
2.6B @2.9, IC7, 9800XT, 2X256 Corsair PC3200, 120GB WD, Aspire 500 watt.
Fold for Overclock.net!

Domenico

ok i try that way

Attached Images

comp.bmp (519.1 KB, 10 views)

Lando95

Good, that worked out. Now can you please post one more pic of the Mainboard tab?

__________________
Main Rig:3.4E @ 4.15ghz, P5WD2, X1900XTX, 2X512 Corsair PC8000UL, Raptors Raid 0, OCZ Powerstream 520.
Rig #2: (folding 24/7)
2.8E @ 3.22, IS7, BFG 6800 Ultra, 2X512 Geil PC4000, 60GB Maxtor, Aspire 500 watt.
Rig #3: (folding 24/7 @ 75%)
2.6B @2.9, IC7, 9800XT, 2X256 Corsair PC3200, 120GB WD, Aspire 500 watt.
Fold for Overclock.net!

Domenico

here is the motherboard

Attached Images

comp mboard.bmp (511.6 KB, 10 views)