|
![]() |
Overclock.net - Overclocking.net > Intel > Intel - General | |
Project 5Ghz 920 On Water.Soon accomplished.
|
||
![]() |
|
|
LinkBack | Thread Tools |
|
|
#1 (permalink) | ||||||||||||
|
Commando
![]() |
Did my first real shoot for 5Ghz tonight, good ambient so I jumped out of the bed and pulled all the windows open and placed the PC at the window
![]() Now I'm just trying to pick up some tips at XS I'm going to hit 5Ghz soonish, now![]() Here's my 4943.56 Mhz validate at Water.
__________________
Core i7 920 d0@ 5027.22 MHz |239.39x 21| at H20 Hwbot.org Profile My Overclocking setup Kingpin F1 Dragon w/ Alu extender CPU pot Asus Commando P965 OCZ Flex PC9600 2GB CPU: E4700|P4 540|Celeron 331| more to come
Last edited by Kriztoffer : 10-01-09 at 11:00 PM |
||||||||||||
|
|
|
|
#2 (permalink) | |||||||||||||
|
Mobo Master
![]() |
wow nice man, i would never run any 45nm chip or let alone a nehalem at 1.6v, but since it is a nice water setup and this is prolly just for validation and not for any stressing then it should be fine, but nevertheless nice job man
|
|||||||||||||
|
|
|
|
|
#3 (permalink) | |||||||||||||
|
Professional GTA 4 Modder
![]() |
i hate you lol. i know my chip can hit that but its just to hot here.
__________________
YOU ONLY NEED TWO TOOLS IN LIFE - WD-40 AND DUCT TAPE. IF IT DOESN'T MOVE AND SHOULD, USE THE WD-40. IF IT SHOULDN'T MOVE AND DOES, USE THE DUCT TAPE. I heard Ford is coming out with heated bumpers in 2010 so your hands don not get cold while pushing it.
|
|||||||||||||
|
|
|
|
#4 (permalink) | |||||||||||||
|
4.0 GHz
|
great go
__________________
95 percent of teenagers would cry if they saw the jonas brothers on a sky scraper, ready to jump. copy and paste this if you are one of the 5 percent that would take a video camera, popcorn, and yell: "Do a Flip!" I am 87% addicted to Counterstrike. What about you?
|
|||||||||||||
|
|
|
|
|
#5 (permalink) | |||||||||||||
|
Commando
![]() |
Quote:
I'd like to find other ways than pumping alot of juice into the chip, tweaks to adchive higher clocks. Thanks alot, it's so close now!! makes me angry just a few more BCLK and I'm there lol
__________________
Core i7 920 d0@ 5027.22 MHz |239.39x 21| at H20 Hwbot.org Profile My Overclocking setup Kingpin F1 Dragon w/ Alu extender CPU pot Asus Commando P965 OCZ Flex PC9600 2GB CPU: E4700|P4 540|Celeron 331| more to come
|
|||||||||||||
|
|
|
|
#6 (permalink) | |||||||||||||
|
Commando
![]() |
Quote:
I've actually got a tip for a DICE pot for you now, I'll show you later today! Could be done in a few hours and cost like nothing.! (will include pictures )Thanks alot! ![]() 1,6v is pretty high, but I'll give it what it need for those freaking 5 Gigahurtz
__________________
Core i7 920 d0@ 5027.22 MHz |239.39x 21| at H20 Hwbot.org Profile My Overclocking setup Kingpin F1 Dragon w/ Alu extender CPU pot Asus Commando P965 OCZ Flex PC9600 2GB CPU: E4700|P4 540|Celeron 331| more to come
|
|||||||||||||
|
|
|
|
#7 (permalink) | ||||||||||||||
|
Professional GTA 4 Modder
![]() |
Quote:
__________________
YOU ONLY NEED TWO TOOLS IN LIFE - WD-40 AND DUCT TAPE. IF IT DOESN'T MOVE AND SHOULD, USE THE WD-40. IF IT SHOULDN'T MOVE AND DOES, USE THE DUCT TAPE. I heard Ford is coming out with heated bumpers in 2010 so your hands don not get cold while pushing it.
|
||||||||||||||
|
|
|
|
#8 (permalink) | |||||||||||||
|
4.0 GHz
![]() |
haha nice, throw in a super pi 32m while you're at it
|
|||||||||||||
|
|
|
|
|
#9 (permalink) | |||||||||||||
|
Commando
![]() |
Quote:
__________________
Core i7 920 d0@ 5027.22 MHz |239.39x 21| at H20 Hwbot.org Profile My Overclocking setup Kingpin F1 Dragon w/ Alu extender CPU pot Asus Commando P965 OCZ Flex PC9600 2GB CPU: E4700|P4 540|Celeron 331| more to come
|
|||||||||||||
|
|
|
|
#10 (permalink) | |||||||||||||
|
4.0 GHz
![]() |
Degradation can occur, with temperatures under control. It is not just an issue of temperature.
However, I sure hope it isn't, it would have implications for me too.
__________________
KILL
|
|||||||||||||
|
|
|
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|