Originally Posted by Malcolm X;

Brothers and sisters, and friends -- and I see some enemies. In fact, I think we’d be fooling ourselves if we had an audience this large and didn’t realize that there were some enemies present.

Originally Posted by redsox83381

So to be clear I should run my memory as high as possible regardless of ratio?

Originally Posted by redsox83381

So to be clear I should run my memory as high as possible regardless of ratio?

Originally Posted by OJX

Drill a hole in the top side of the case, preferably near the front
Make sure you sandpaper the hole, and then put some U rubber over it to avoid sharp edges. Put some grease around the newly drilled hole, and then screw your computer, screw it hard. Maybe install some UV lights and turn em up to indicate that your computer is also excited.

Originally Posted by gonX

Obviously you will degrade performance at a part... so thing such as 1200MHz at 7-7-7-21 is not worth it over 1100MHz at 5-6-6-12

Originally Posted by pauldovi

Yes, normally, running your memory as fast as possible, while being mindful of the latencies is a good idea.

Originally Posted by Malcolm X;

Brothers and sisters, and friends -- and I see some enemies. In fact, I think we’d be fooling ourselves if we had an audience this large and didn’t realize that there were some enemies present.