ericeod

I just got my Newegg Special edition Crucial Ballistix Tracers with the D9GMH (B6-3) rated at 4-4-4-12 2T at 2.2v. These are made for Newegg's upcoming Lanfest promotion. Notice the blue LED placement. These are a limited edition and wont last long!
Here is a post at AnandTech's forums about the ICs. These modules are the BL2KIT12864AL804 Tracers modded for newegg.

Type: DDR2 PC2-6400
Frequency: 1200Mhz
Timings: 5-5-5-15 - 2T
Voltage: 2.15v
Memory Size: 2GB (2 * 1GB)



------------------------------------------------------------------------------------------------------------------------------------------------------------


These modules are monsters. DDR2 1200 @ 2.15v 5-5-5-15 2T 3 Hrs Memtest and 1 Hr Orthos!

__________________
eVGA 680i Overclocking guide .......... ASUS P5E/Maximus Thread.......... 4.4GHz CPU-Z

The_Rocker

Nice!

I still don't think its needed to have ram running at anything over 1066Mhz because you do nothing which will take advantage of the extra bandwidth.

Although i may give it a try

__________________
Planned Upgrades (Coming Soon):
Intel Core i7 950 D0 (Deal in progress)
6GB Kingston 2000Mhz HyperX (Deal in progress)
ASUS Rampage II Extreme X58 (Ordered)
Thermalright LGA1366 Bolt-Thru-Kit (Ordered)

Different GFX set up (Possibly 5870's)

BloodThirstyEmu

Looks promising. Might have to give it a try.

__________________
I am 89% addicted to Counterstrike. What about you?

ericeod

I agree with you 100%. There is no reason to run them faster then the FSB. I run them 24/7 at DDR2 900 to match my 450 FSB. I was just asked by another member to stress test them and see how high they would go at 2.15v.

__________________
eVGA 680i Overclocking guide .......... ASUS P5E/Maximus Thread.......... 4.4GHz CPU-Z

Juggernaut

Type: DDR2 PC2-8500
Frequency: 1200Mhz
Timings: 5-8-8-28 - 2T
Voltage: 2.2v
Memory Size: 2GB (2 * 1GB)

Will try tighter timings, the 1200Mhz is for my E6400 @ 2,4Ghz.

Lu(ky

Type: DDR2 PC2-8500 Ballistix
Voltage: 2.2v - 2.25v
Memory Size: 2GB (2 * 1GB)

I was able to boot into windows with the following specs:
825 @ 3-3-3-5 1T 2.25v and 890 @ 4-3-3-3 1T 2.25v and 925 @ 4-4-4-4 1T

New SuperPi 1M at 12.250 @ 464 x 2 = 925 @ 4-4-4-4 1T 2.25v

Attached Thumbnails

     

__________________

Mr.Bones

Just realized you have an X38 board....How good does it clock with the e6400

CpLRusty

Yay... I'm in the club too....

2GB Crucial Ballistix PC2-8500 (BL2KIT12864AA1065)
Stock Timing: 5-5-5-15 2T
Stock Speed: 1066
Stock Voltage: 2.2v

I'm presently running them below that. I can run them up to 945 MHz @ 4-4-4-8 2T, but after that no matter what combinations of vDimm, NB, etc. I put into BIOS, the computer won't boot.

I'm running my E6850 at 3.6 GHz.

Based on what I've seen in this thread I think I may have to run them up to stock 1066, 5-5-5-15 2T and see what happens.

__________________
God grant me the serenty to accept the people I cannot shoot, the courage to shoot the ones I can, and the wisdom to know the difference - TR Serenity Prayer

FischmungaXTR

My pc wont load up properly much past 1150Mhz, with ram set 1:1 on stock 5-5-5-15 timing

is this the ram holding it back or just an fsb hole? cos i see people on here with faster ram than that

__________________
I need moar overclocking

Lu(ky

Try the new BIOS UPDATE from P30 to P31

__________________