GigaByte

All should do 800Mhz fine, just run at the timings of the slower ones, 6-6-6-18 @ 1.8v OR 5-4-4-15 @ 2.0v. 4-4-4-15 @ 2.2v might work, run Memtest 86+ and see. Current speed/timings they are at is on the memory tab in CPU-Z.

__________________

urgrandpasdog

I have a set of these:
http://www.ocztechnology.com/product..._ii_4gb_series

OCZ FLEX II PC2-9200

Running at 800mhz 4-4-4-12, because my northbridge can't handle the high-speed ram in addition to my OC'ed FSB

solidsquirrell

ah thank you, im fairly new to RAM timings, and overclocking RAM
as you could probably already tell.

here are my timings.

Attached Thumbnails

 

GigaByte

So 333*2 means they are running at 667Mhz. So if you wanted to OC to 3.6Ghz thats 400FSB and running your RAM in linked mode (1:1) will result in them being brought up to stock speed, in this scenario you would set them to 6-6-6-18 @ 1.8v if you don't mind higher latency and like low volts OR 5-4-4-15 @ 2.0v if you want better latency with higher volts.

__________________

solidsquirrell

thanks for the info! Ill have to run memtest86+ soon, of course when i finish figuring out how to run it, .. thanks again.

__________________
more pics of first build

The HAF 932 Case Owners Club

philhalo66

Type: 4GB OCZ FATAL1TY
Volts: 2.1v EPP
Timings: 5.0-4-4-18
Speed: 880MHz
CPUZ
http://valid.canardpc.com/show_oc.php?id=673675

__________________

el gappo

ok where to start
downstairs i have a set of ocz platinum rev2 800mhz they do 1100mhz which is pretty damn cool
i just sold my ocz blades
had some ocz flex for a little while but they had to go because of my cooler at the time
got these for a friends build they look schweet just platinums as far as i could tell
now i have some intel ocz titanium ddr3

the most impressive of the buch are the platinum 1gb sticks, dont know if i just got good sticks but they did 1066 at 5-5-5-15 with 2.175v the blades were 2gb stick and kept up with them prettty well but couldnt match the timmings . haven't got to play with these new ones much yet they are at 7-6-6-24-1t 1500mhz for now with 1.9 but ill have a proper play with them in the week. sure i wont be dissapointed

__________________
no P.O.S.T? i made a guide for you CPU-Z validation of am3 700e
Phenom II 965 4.532ghz CPU-Z validation AIR and 4.612ghz on the bong hwbot profile
from here on in i shall be known as GAPPO THE DESTROYER

AMOCO

I'm in:::

Attached Thumbnails

 

__________________

jtypin

OCZ Vista Starter RAM 23.99 at newegg.
It's DDR2 800MHz and it is 2x1GB.

__________________
How does one figure out how to become a better person.

mtbmike777

i look forward to the results as i havent made my mind up on my ram for my x58 mobo build, was thinking of GSkill Perfect Storm, but i could easily be persueded to stay loyal to OCZ with my past purchase's

__________________