orbiter

I was a bit dubious about OCZ ram initially after using Corsair ram for years and years, however once I had a couple of corsair sticks fail (not OC'ed) I thought I'd have a change. My PC8000 reapers have been no trouble at all and OC pretty good too. Currently the ram is at 1066MHz @ 1.94v.

__________________

johnstokesphotography.co.uk

OziriS

I got 2X1024 Xtc 1066 since friday (sli rdy) and it prety nice!

1116mhz
5-5-5-15 @ 2.2v

No trouble at all!

Cyant

I use 2x OCZ Titanium Alpha VX2 PC8000 4-4-4-15 with 2x Crucial Ballistix PC8500.

Before I purchased the Crucial I was able to run 1150+ at 5-5-5-18 with the Titanium but I prefer 1:1 ratio. I don't notice the difference between 1:1 and full ram OC.

What I do notice however is the voltage needed for operation. When using only 2x Titanium I was able to run 950Mhz 4-3-4-12-1T 1.85v of course now with 4 sticks I don't run 1T hehe.

Still don't have to push the voltage too high with 4 sticks at 850Mhz 4-4-4-12 1.95v

I would trade my Ballistix PC8500 for more Titanium Alpha VX2 PC8000 any day of the week, of course they don't make those anymore and they are quite a bit more expensive...

Perry

OCZ Titanium (EPP) DDR2-800 2x1GB Dual Channel
Overclocked to 1000mhz
2.187v
5-5-5-15 2t
Northbridge needs to be set at 1.393v to ensure stability

***EDIT***
HA! They updated the OCZ site for my memory and the EVP now goes up to 2.3 instead of 2.2! Looks like it's time to gun for 1100 or even 1200mhz!

Who says Elipda chips blow?

***EDIT AGAIN***
Well, I can get them to 1066 but it puts a strange divider into the mix. I can't get to 1100mhz no matter what I try to I'm content to sit at 1000mhz from an 800mhz kit.

__________________

xHassassin

Any opinions on the Reapers?
Reaper

droby1987

I have the OCZ Reaper 8500 2x2 gig kit @ 1066MHz stock

Overclocked I have it up to 1142MHz and I have read plenty of reviews saying that it can go faster.


Any recommendations on a good voltage for this memory?

GigaByte

2.2v no problem for those, I think their stock is 2.1v.

__________________
IHS Removals, How to do it, Should I do it, and the Facts!
How To: Get more from your X1900XT(X) OCZ RAM owners club!Intel Penryn (45nm) Thread
GIGABYTE P35-DS4 Thread ß₤ứə Çřёώ

Perry

Check the site and keep it within your EVP limit and there's your answer.

__________________

DennisC

Here's a pic of my ram

__________________

Perry

It's funny how only 1 person voted that they don't like OCZ memory and didn't give a reason why.

__________________