porky

Got 2x2GB OCZ PC6400 ram

Running it @ 10100MHZ

Timings stock : 800mhz 5-4-4-15

overclocked :
1010 5-5-5-15 2.175v


what is bank cycle time??? , in cpu z it shows it as 25 stock settings , and when i overclock it shows it as 31.......

__________________
My GTX280 VS 4870X2 Review!http://www.overclock.net/graphics-ca...-showdown.html

GRID Drift Club

brndonwize

Type: 2x2GB OCZ DDR3 PC3-16000 Platinum Edition
Volts: 1.85
Timings: 7-7-7-24
Speed: 586Mhz

I've got a problem with my OCZ Memory right now and I'm hoping to get some support here. So I have a Maximus Extreme but I can't seem to get my MEM to 1600Fsb. Any help would be much appreciated!

pioneerisloud

Type: 2x1GB OCZ DDR500 Platinum Edition
Volts: 2.90
Timings: 2,3,2,6,1T
Speed: 214MHz (DDR428)

That's what I have . It may not be DDR2 or 3, but it gets the job done. I think I may need to RMA it again though. The sticks themselves aren't bad, but they don't work with my board....and OCZ told me they would. I can only hit a MAXIMUM speed of 233MHz (DDR466) with these, and even then its not stable. And that's at super loose timings of 3,5,5,12,2T and 3.0v running through them! Nothing gets these suckers stable at much past what I'm at now . They work fine on my fiance's MSI K8N Neo4 SLI though. Go figure!

__________________

Zikofski

i own 4Gb 4x1Gb OCZ platinum 800mhz but not overclocked

__________________
PS3 NETWORK

ID: Zikofski (add me if you want :P)
Games Currently Playing: CoD4, FIFA 08
COD4 Info
Rank: Prestive lvl2 Rank13
Guns Use: All Snipers & AK47, AK74, G36C, MP5
LOOKING FOR CLAN BADLY

Y3K

I got 4 sticks of 1 GB, (4 GB) DDR2 OCZ PC-8800 Gold XTC-- Not overclocked, Never got around to overclocking it yet. If someone would like to give me some timings to try, i'll give it a go..

__________________
-Straight to the moon...

waqasr

I Own OCZ Gold series BH-5!! i love these sticks..the best ram ever made..stock speeds 200mhz 2-2-2-5 1t..ive got them at 260mhz 1.5-2-2-0 1T at 3.6V..now ive just ordered my intel quad build and i ordered the ocz sli edition pc 6400 ram just because it was so cheap.

__________________
SEX
Now that ive caught your attention please scroll up and ACTUALLY read my post
FOR SALE Intel Q8200 , POV 8800 GTS 512, Phenom 9500!
IVE GOT SOME SAN ACES FOR US UK GUYS, GIMME A PM IF YOUR INTERESTED
17718 3DMARK 06 score with sig righttp://service.futuremark.com/compare?3dm06=6793718
My Xbox Gamertag is LiL WaKy, i challenge you to Street Fighter IV, COD4 and Forza 2!

Spart

I have this 2x1gb dual channel kit.

http://www.ocztechnology.com/product...annel_platinum

I haven't tried to OC it.

__________________

noodle

i have 2gb of ocz platinum xtc, i changed the other day though to 2gb of corsair xms2 Pc2 8500 1066mhz

__________________



15.1k 3dmark6 on vista
4ghz E8400 100% stable

ericeod

I have the same motherboard and ram. I had to contact OCZ in order to find how to get the ram to run at the rated speed. You might want to get memset, it will help you dial in the ram from within windows without having to enter the bios every time you want to make a change. Here is the
Link showing stable settings for the motherboard.

__________________
eVGA 680i Overclocking guide .......... ASUS P5E/Maximus Thread.......... 4.4GHz CPU-Z

lsclincoln

I got the ReaperX 2x2 kit and I love them so far.
4-4-3-10 @840mhz 2.1volts.
Working perfect.
As you can due to the large heatsinks that fitting any more of these wouldnt work.
Also they wont fit in a board that memory installs side by side.

Attached Thumbnails