|
|
 |
Overclock.net - Overclocking.net > Intel > Intel Memory | |
Different OCZ Reaper 8500 problems
|
||
 |
|
|
LinkBack | Thread Tools |
08-23-08
|
#1 (permalink) | |||||||||||||
|
4.0 GHz
Join Date: Jun 2008
Location: Jersey, State Number 3
Posts: 123
Rep: 5
 Unique Rep: 5
Trader Rating: 0
|
Different OCZ Reaper 8500 problems
So I was finally able to boot into windows and all with my reapers.
__________________They are 2x2 GB PC2-8500. Biggest problem was that to boot, the NB voltage had to be 1.57 or 1.61 to get it to boot. This was way too high so I dropped it back down to 1.45. Currently I am running prime95 small FFTs with my E8500 at 4 GHz. I dropped the strapping of my ram to 333/800 and am only booting with the ram at 1012. Ideally I want to stay with the strapping I have and just run the processor at 4.2 with Ram at 1066 (this would be a frequency of 444x9.5 = 4.2). This leaves my strapping at 333/800 but with the FSB set at 444, this allows my ram to hit 1066. So it will post, just won't boot into windows. Any ideas on what I should change, or should I just actively cool my Northbridge somehow and crank my NB voltage to 1.6?
|
|||||||||||||
|
|
|
08-23-08
|
#2 (permalink) | ||||||||||||
|
ATI Enthusiast
|
Check here there are some really good stickys
http://www.ocztechnologyforum.com/fo...splay.php?f=46 I have read thru them and this info applies to all 2x2gb kits the trd seems to be a big factor. Hope this helps
__________________
Don't forget to welcome our New Members Congratulate our Members for their accomplishments
|
||||||||||||
|
|
|
|
08-24-08
|
#3 (permalink) | |||||||||||||
|
4.0 GHz
Join Date: Jun 2008
Location: Jersey, State Number 3
Posts: 123
Rep: 5
Unique Rep: 5
Trader Rating: 0
|
Hmm, well I did the performance calculator and I'm running the right performance. I will try again though.
__________________
|
|||||||||||||
|
|
|
|
08-25-08
|
#4 (permalink) | |||||||||||
|
RAM Fan
Join Date: Mar 2008
Location: Forney,TX (right of BigD)
Posts: 1,080
Rep: 102
Unique Rep: 72
Trader Rating: 0
|
tRFC will probably need to be 50+
|
|||||||||||
|
|
|
08-25-08
|
#5 (permalink) | |||||||||||||
|
4.0 GHz
Join Date: Jun 2008
Location: Jersey, State Number 3
Posts: 123
Rep: 5
Unique Rep: 5
Trader Rating: 0
|
tRFC is already over 50. Actually at 54.
__________________Now if I get close to 1066 I get a corrupted boot. Hmm, don't know what it is?
|
|||||||||||||
|
|
|
|
08-25-08
|
#6 (permalink) | |||||||||||
|
RAM Fan
Join Date: Mar 2008
Location: Forney,TX (right of BigD)
Posts: 1,080
Rep: 102
Unique Rep: 72
Trader Rating: 0
|
Bump tRFC to 60.
You may alco want to querey the guys at OCZ forums: http://www.ocztechnologyforum.com/fo...splay.php?f=46
|
|||||||||||
|
|
|
|
08-25-08
|
#7 (permalink) | |||||||||||||
|
4.0 GHz
Join Date: Jun 2008
Location: Jersey, State Number 3
Posts: 123
Rep: 5
Unique Rep: 5
Trader Rating: 0
|
Did the bump, get into windows and I get a BSOD for memory.
__________________Closing in on 4.2 GHz though.
|
|||||||||||||
|
|
|
|
08-25-08
|
#8 (permalink) | ||||||||||||
|
RAM Fan
Join Date: Mar 2008
Location: Forney,TX (right of BigD)
Posts: 1,080
Rep: 102
Unique Rep: 72
Trader Rating: 0
|
Quote:
Also ask around on the DFI thread: http://www.overclock.net/intel-mothe...rs-thread.html
|
||||||||||||
|
|
|
|
08-25-08
|
#9 (permalink) | |||||||||||||
|
4.0 GHz
Join Date: Jun 2008
Location: Jersey, State Number 3
Posts: 123
Rep: 5
Unique Rep: 5
Trader Rating: 0
|
Ehh, well at 4.1 I think I'm doing just fine.
__________________This will be more than enough to run my engineering apps, and this is only until I upgrade the system to Nehalem this winter. For this OC I think I'm happy and done!
|
|||||||||||||
|
|
|
|
08-25-08
|
#10 (permalink) | ||||||||||||
|
ATI Enthusiast
|
Glad to hear that it is stable, wants your NB volts at?
__________________
Don't forget to welcome our New Members Congratulate our Members for their accomplishments
|
||||||||||||
|
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
