|
|
|
#1 (permalink) | |||||||||||||
|
AMD Overclocker
|
ok so my friend has a 920DO chip with a stock VID of 0.94v. (yes it was cherry picked <<)
__________________what he wants to know is if it is ok to put 1.375volts through it (4.4 on water) since the intel spec states the maximum VID of the DO is 1.375. what i think he is getting at is because he has a low VID chip, does this mean it can or can't handle high voltages. and also what is the max voltage for the DO for 24/7 on water
Last edited by bringonblink : 4 Weeks Ago at 05:48 PM |
|||||||||||||
|
|
|
|
|
#2 (permalink) | ||||||||||||||
|
4.0 GHz
![]()
Join Date: Dec 2008
Location: Dripping Springs/Denton
Posts: 890
Rep: 46
![]() Unique Rep: 44
Trader Rating: 1
|
it all depends. different chips behave differently with extra voltage. just cause it has a low VID doesn't mean it'll handle a lot of volts well (usually it does though). The low VID just means that it'll handle the frequency at a lower voltage, not that the safe voltage range is lower
Just always keep in mind that the more voltage, the higher the risk you run of binning it
__________________
I'm a junior in college, Comp Sci major/math minor, if you wanna talk, send me a pm ![]() The *OFFICIAL* HAF 932 Case Owners Club My HAF 932 Paint Job![]() Water Cooling (own red, need black) Quote:
|
||||||||||||||
|
|
|
|
|
#3 (permalink) | |||||||||||||
|
AMD Overclocker
|
ok so what is generally the accepeted max voltage for 24/7?
__________________lets say he wants the chip to last at least 2 years
|
|||||||||||||
|
|
|
|
|
#4 (permalink) | |||||||||||||||
|
4.0 GHz
![]()
Join Date: Dec 2008
Location: Dripping Springs/Denton
Posts: 890
Rep: 46
![]() Unique Rep: 44
Trader Rating: 1
|
Quote:
he just needs to check his overclock every couple months for stability and back off the voltage if it's no longer stable. otherwise. if he doesn't want to, the max would be what the intel specs say is the max
__________________
I'm a junior in college, Comp Sci major/math minor, if you wanna talk, send me a pm ![]() The *OFFICIAL* HAF 932 Case Owners Club My HAF 932 Paint Job![]() Water Cooling (own red, need black) Quote:
|
|||||||||||||||
|
|
|
|
|
#5 (permalink) | |||||||||||||
|
AMD Overclocker
|
yes but my point is since he IS stable a the moment, will running 1.375 be ok for 24/7 for 2 years? or will the chip degrade quickly
__________________
|
|||||||||||||
|
|
|
|
|
#6 (permalink) | |||||||||||||
|
Intel Overclocker
![]() |
You will be fine.
I've been running my q6600 @ 1.6v (max intel req. is 1.5) for over a year. No issues nothing and still rock solid.
__________________
|
|||||||||||||
|
|
|
|
|
#7 (permalink) | ||||||||||||||
|
4.0 GHz
![]() |
Quote:
Mine has a 1.08v VID, I think my batch tends to as well, I am running 1.435v through it at 4431 MHz, but the hottest core only gets to ~70c at 100% load in LinX, so as long as there is not some hidden instability, I highly doubt it it shortens the i7's life span. There was still plenty of room to lower that vCore, but I have to do it over because of my mobo RMA.
__________________
KILL
|
||||||||||||||
|
|
|
|
|
#8 (permalink) | ||||||||||||||
|
AMD Overclocker
|
Quote:
thanks mate, how long you been running it with that vcore?
|
||||||||||||||
|
|
|
|
|
#9 (permalink) | ||||||||
|
*cough* Stock *cough*
![]()
Join Date: Mar 2007
Location: Edmonton, Alberta
Posts: 2,343
Rep: 189
![]() ![]() Unique Rep: 150
Trader Rating: 10
|
Max Vcore is whatever the motherboard maxes out at ... unless of course you Vmod it ...
__________________
|
||||||||
|
|
|
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|