Anish

Hi i would like to get a solid 4.0ghz out of my pc. i've just bought some new kingston 2000mhz 4gb ram so i'm guessing running 500x8? all my system specs are below and my ram model number is KHX2000C8D3T1K2/4GX. Any help is appreciated.

thanks

Ryanb213

for one, you would want to start off by using 471x8.5
set your voltage just to start off at 1.3 or so.

These are my bios settings, they will be different on in your bios but i hope this gives you an idea.


471x8.5
943MHz Ram
5-5-5-15
1.33750 vcore
PLL = 1.57
FSB termination voltage = 1.36
Dram voltage = 2.20
NB Voltage = 1.34
SB voltage = 1.2
Dram Static Read control = Disabled
Dram read training = disabled
PCI-E Spectrum = disabled
CPU spectrum = disabled
CPU margin enhancment = performance mode

__________________