ASUS P5N-E SLI 650i Thread

[dpawl31]

Hey guys.
OC'd my 7600GT again, now up to 613/1600.
Also reverted to my loosened my timings and went back to my 5:8 divider.

Gained 220 points in 3DMark06! Shweet!
3DMark06 Link

[trekman]

not bad! how are your temps?

[carey8]

Man, im stuck at 2.9Ghz, I cant go any higher no matter what i do.
MY Voltages are:
vCore: 3.36XX
Mem: 2.2XX
Mobo: 1.5XX

I cant go higher no matter wha ti change my voltages to. Am i doing something wrong?

HELP!! Ive tried more or less everything.

My specs are:
e6300
Asus P5N-E SLI 650i
Tuniq Tower 120
7900GTO
WD 250GB 16mb cache 7200RPM

Any help id really appreciate.

[trekman]

you have to unlink your memory on your bios then it should work

[carey8]

Ive unlinked it.
Oh yeah, my RAM is GeIl Pc6400-800mhz.
Can someone give me a step by step guide?
Like what voltages i should have etc.?
Im really really stuck.

Id really appreciate it if i coul dhave some quick replies.

[dpawl31]

Man, im stuck at 2.9Ghz, I cant go any higher no matter what i do.
MY Voltages are:
vCore: 3.36XX
Mem: 2.2XX
Mobo: 1.5XX

I cant go higher no matter wha ti change my voltages to. Am i doing something wrong?

HELP!! Ive tried more or less everything.

My specs are:
e6300
Asus P5N-E SLI 650i
Tuniq Tower 120
7900GTO
WD 250GB 16mb cache 7200RPM

Any help id really appreciate.

#1. Welcome!
#2. Click User CP, Edit System and put your full specs there.
#3. Your OC on a 6300 to 2.9Ghz is a 55.91% overclock...
That is GREAT. Your stock speed of 1.86 up to 2.9? Great!
What multi is the 6300? What is your FSB? I don't know all the specs for the conroes because I refuse to look them up so I stay happy with my little Pentium D lol.
#4. If you fill out EVERYTHING possible, everything you know in your system specs, maybe we can help you out to get a higher OC. (for example, temps, stock vs overclock #'s etc.)
#5.

vCore: 3.36XX
Mobo: 1.5XX

No way your vcore is over 3 volts!
Mobo- you mean your northbridge?
What bios are you running? Stock?

[carey8]

there we go, sorry i ment my vCore 1.36xxx Sorry.

[k!D$*W/*gUN$]

Originally Posted by trekman

not bad! how are your temps?

If u r talkin to me my temps r 109*F max load, 75*F max idle(<<<wilth all PC's runnin in the room), 40 - 60*F in my room (sometimes gets 70*F in my room with all 3 pc's running) its winter and 0*F out side
i have my room shut off from all heat in the house
the Artic Silver i bought helps alot cuz i ran 110*F on stock thermal junk and stock CPU speeds.....good stuff

steve

[dpawl31]

there we go, sorry i ment my vCore 1.36xxx Sorry.

No problem bud, figured it was a type.
What is your FSB/Multi? Once I know that I can maybe help you.
From what I can tell, you are probably maxxed out. It MAY be you have the old bios and the RAM issues are stopping you. You might be able to squeeze more out of it if you up the voltage some more, but I don't know what is safe for conroes so don't do it till you talk to some other conroe owners! I would start a new thread asking that specific question.

Are you running a 1:1 divider for stability?

If u r talkin to me my temps r 109*F max load, 75*F max idle

I think he was referring to me as I was talking about my OC'd 7600GT.
If you were talking card temps, I haven't really tested it yet. I just ran coolbits' "find max" button and thats what I got for core/mem.
As far as temps w/ my PentD @ 3.5, 36idle and 52 load. It's exactly a 25% OC too. I need to get some real AS5, I tried that ceramique crap, hated it, REALLY hard to put on (super sticky!) I am sure it is helping my temps as it is supposed to be as good if not better than AS5, but it is just a PAIN. Once I get some AS5 and some more cooling (nb, sb, case fans) I will attempt to get mah "D" to over 4Ghz, I am VERY positive I can get it! I am already on the top 100 intel overclock list, can't wait to get in the 4Ghz club!

Who wants to bet I can't get to 4Ghz, c'mon!

[carey8]

Originally Posted by dpawl31

No problem bud, figured it was a type.
What is your FSB/Multi? Once I know that I can maybe help you.
From what I can tell, you are probably maxxed out. It MAY be you have the old bios and the RAM issues are stopping you. You might be able to squeeze more out of it if you up the voltage some more, but I don't know what is safe for conroes so don't do it till you talk to some other conroe owners! I would start a new thread asking that specific question.

Are you running a 1:1 divider for stability?

No im not running a 1:1 Divider For stability, As my ram is rated at 800Mhz and my FSB is at 1660Mhz My ram would definatly not run at that.

My ram is also stock 4-4-4-12 timings now im running it at 5-5-5-12 timings.

Thats how i see it anyway, anyone like to give me an explination if im wrong?

Im on the new BIOS, The 0401. Thats newest i could find anyway.

Thanks for your help.