|
|
|
#3041 (permalink) | ||||||||||||
|
Intel Overclocker
![]() |
hajpoj, go to your control panel (User CP at the top of the page) and click 'edit system' over on the left. put your details in there so it's easier to see what you've got as people try to help you out.
first off..when you say no overclock seems to work, what exactly are you doing? you've gotta start in small steps. first set everything manually to stock settings (vcore, vdimm, cpu and ram clocks, ram timings, all that stuff), and then slowly push your FSB up in 25MHz steps. after each time you push it up, make sure you can boot into windows. once you fail to boot, go back to the BIOS and up the vcore by one notch at a time until you get into windows. keep that going and see how far you can get.... at some point you may have to up the voltage on the NB as well.
__________________
Pictorial Lapping Guide--Check this out if you're thinking of lapping an HSF and/or IHS!! ASUS P5N-E OCing Guide Best RAM timings guide I've seen "Incorrect using it may cause your system broken. For power End-User use only!" -Gigabyte MB manual (8I865GME-775-RH-Rev2.0)
|
||||||||||||
|
|
|
|
|
#3042 (permalink) | |||||||||||||
|
New to Overclock.net
|
How do I attach a fan to the SB since there is no screw holes?
__________________
|
|||||||||||||
|
|
|
|
|
#3043 (permalink) | ||||||||||||
|
Intel Overclocker
![]() |
...look again? there ARE holes....
__________________
Pictorial Lapping Guide--Check this out if you're thinking of lapping an HSF and/or IHS!! ASUS P5N-E OCing Guide Best RAM timings guide I've seen "Incorrect using it may cause your system broken. For power End-User use only!" -Gigabyte MB manual (8I865GME-775-RH-Rev2.0)
|
||||||||||||
|
|
|
|
|
#3044 (permalink) | |||||||||||||
|
New to Overclock.net
|
Ah my bad, I can only see one, the 2900 must be in the way of the other one , guess it means I cant get something on?
|
|||||||||||||
|
|
|
|
|
#3045 (permalink) | ||||||||||||
|
Intel Overclocker
![]() |
i'm getting the fan and sinks asce recommended earlier (look back a few pages, don't wanna find the link again)...dunno how close the 2900 is to the board, but it looks to me like there's room under my 8800 for something very flat. if you wanna wait a couple days I can verify for certain that they fit. they're supposed to come thursday.
__________________
Pictorial Lapping Guide--Check this out if you're thinking of lapping an HSF and/or IHS!! ASUS P5N-E OCing Guide Best RAM timings guide I've seen "Incorrect using it may cause your system broken. For power End-User use only!" -Gigabyte MB manual (8I865GME-775-RH-Rev2.0)
|
||||||||||||
|
|
|
|
|
#3046 (permalink) | |||||||||||||
|
WaterCooler
![]() |
I love the one on my SB as its soo cold to touch. Will anything that has a low profile should be able to fit underneath it, my Akasa chipset cooler will be touch and go to fit under a 2900 as it has a small 40mm fan included on it but, you should be if you are not using the second pci-e slot.
Hajpoj, you may want to get to 3.2Ghz but it depends on your chip wanting to do those kind of speeds. Dont got over 1.5v on the vcore unless you have lots of money for a new chip
__________________
P5N-E Sli Pencil mod image (kudos goes to The Pook) TriBeCa 's ASUS P5N-E SLI Overclocking Guide
|
|||||||||||||
|
|
|
|
|
#3047 (permalink) | |||||||||||||
|
New to Overclock.net
|
Does the SB really need a cooling soloution when it dont get overclocked?
__________________
|
|||||||||||||
|
|
|
|
|
#3048 (permalink) | ||||||||||||
|
New to Overclock.net
|
I'm in windows at 3.0 GHZ w/ 1.425 vcore in bios
__________________But nothing over 375 FSB will post, I've even upped the vcore to 1.5 and nothing. SO CLOSE TO 100% overclock
|
||||||||||||
|
|
|
|
|
#3049 (permalink) | |||||||||||||
|
New to Overclock.net
|
Right, I adjusted the LDT to 5x again, so these are the settings I used:
__________________Vcore: 1.35V + 100MV Ram: 2.259V FSB: 1500 Ram: 750 5-5-5-15 (High latencys so I could be sure the ram was not a cause) It botted into Windows fine from what it seems, as soon as I started Orthos, within about 5 seconds I got a BSOD.
|
|||||||||||||
|
|
|
|
|
#3050 (permalink) | ||||||||||||
|
New to Overclock.net
|
Stressing right now. Failed after 2 min in orthos.
__________________Upped the Vcore one notch. Testing again. 43-45 idle temps, load appears to be 62~63 under orthos using core temp. RM CPU clock is reporting 49~51 load temps....I'm confused here... System locked up after 10 minutes, upped the vcore one more notch.
Last edited by Hajpoj : 08-07-07 at 03:25 PM |
||||||||||||
|
|
|