ASUS P5N-E SLI 650i Thread

[quakermaas]

Originally Posted by diddler1979

Try my guide and boot cd to install bios 0608.

Originally Posted by diddler1979

My guide has all the info you need but the simple answer is you are forgetting to put /f at the end of the bios command. This forces the bios to be put on your machine.

AWDFLASH 0608.BIN /F

Hi
Still didn't work. I will download the .ISO again and try again later, thanks for your help.
Here is a screen shot, maybe some body can see where I am going wrong.

EDIT:
Finally got back to the 0608 bios and a 475fsb with your help.

I just used the AWDFLASH 0608.BIN /F with a usb drive that I had setup to boot of and with a different AWDFLASH + 0608 bios

For some reason I could not get it to work from your ISO, maybe it got corrupt when I was down loading it.

Anyway

Thank you so much. +REP

[brandon6199]

I just sent my ASUS P5N-E SLI for RMA. It's been well over a year since I've had it, and it's starting to crap out

[Snake_A]

Originally Posted by quakermaas

Hi
Still didn't work. I will download the .ISO again and try again later, thanks for your help.
Here is a screen shot, maybe some body can see where I am going wrong.

EDIT:
Finally got back to the 0608 bios and a 475fsb with your help.

I just used the AWDFLASH 0608.BIN /F with a usb drive that I had setup to boot of and with a different AWDFLASH + 0608 bios

For some reason I could not get it to work from your ISO, maybe it got corrupt when I was down loading it.

Anyway

Thank you so much. +REP

Hey , im having a look on ur pc specs. How did you manage to overclock your ram over 800mhz??? (P5N-E SLI can take Ram up to 800mhz)

[xtascox]

Snake, I've had a lot of success overclocking memory on this board. I had mine running up to 1066, but I dropped back down because I didn't like putting so much voltage to my memory and northbridge. I bumped it down to 950 when I had my pentium 4 at 4.ghz. This board seems to do well overclocking memory IMHO.

[Snake_A]

Really??? I want my q6600 @ 3ghz and Ram on 1000mhz. Is it possible??? Can someone give me the configuration please???

[UkGouki]

^you need bios 0608 set the ram manually timings and voltages i had my q6600 @ 3.0ghz and ram at 850mhz

ram timings were 4.4.4.12 command rate 2 2.110voltage
cpu @ x9 multi 1333qdr/fsb = 333x9 1.2500v on cpu bear in mind my cpu has an extremely low vid! and is the go revision

disable speedstep & c1e enhanced halt state i left all other like northbridge etc.. on auto was stable for 6 months, until i got my 9800gtx+ and well had to update my bios to take it then my board crapped out and the fsb bus burned out almost took the gpu with it i didnt bother rma'ing it i just boaght a new board my p5nd 750i its a lot more stable and cooler etc...

[Snake_A]

Your mobo is p5n-e sli or p5n-d ?

[UkGouki]

Originally Posted by Snake_A

Your mobo is p5n-e sli or p5n-d ?

i have both i had the p5n-e sli until saturday last week when it died

click on my stock 3dmark06 score

[Snake_A]

ok.. i will check out your configuration... my bios rev is 0608 my q6600 is G0 .

[Ealae]

I'm having a little trouble breaking the 3GHz mark with my E2140. My goal is 3.2GHz for a 100% overclock.

Currently:
Vcore - 1.4v
NB - 1.393v
Memory voltage - Spec
FSB - 1400
RAM - 700
BIOS rev. - 0608

I tried the following to attempt 3.2GHz:
Vcore - 1.4125v
NB - 1.563v
FSB - 1600
RAM - 800

But it doesn't boot. Shouldn't those settings be enough for 3.2GHz? I'll try upping the Vcore, but I'm not gonna go much higher for temps sake. I'm using a TRUE and an HR-05 SLI/IFX on the NB. SB doesn't have a sink on it. Could that be a factor? Although I have a pretty good airflow (250mm side intake, 200mm top exhaust, 120mm rear exhaust).