ASUS P5N-E SLI 650i Thread

[dieanotherday]

Originally Posted by Zippit

If its to much just rub it off an reapply.

you look like one of those commercial girls =D.

[MereAlias]

Originally Posted by sexybastard

yep in most bios' the FSB is quad pumped... e.g. 2000 = 500fsb. and to keep a 1:1 divider you do divide or multiply by 2 depending on which way you read your fsb. 2000/2 = 1000mhz ram for 1:1.

500fsb x 2 = 1000mhz ram for 1:1

1:1 can be beneficial and i always try to use that ratio but do some bench marking and see which one yields more performance.

also since your running your run at lower spec you could tighten those timings up quite a bit. if your at 5-5-5-15 try 4-4-4-12... if thats stable try going lower.

that would yield best results IMO.

Thanks so much for the advice.

Yea my ram is stock: 5-5-5-15 at 800 MHz and my my FSB is 1333.

Now that I'm at 1:1 with 667 MHz set for the RAM I will definitely look into trying to set my RAM to 4-4-4-12 soon.

[pheoxs]

Can someone link me to the Vdroop pic? I know its in here at least 10 times but I'd rather not look through 8700 posts finding it lol.

P.S. Zippit your new avy looks good.

[mcogan10]

Originally Posted by MereAlias

Thanks so much for the advice.

Yea my ram is stock: 5-5-5-15 at 800 MHz and my my FSB is 1333.

Now that I'm at 1:1 with 667 MHz set for the RAM I will definitely look into trying to set my RAM to 4-4-4-12 soon.

I think you will benefit from the extra speed...these Intel platforms don't like the tighter timings as much as AMD does, and you might be better off just running your ram faster than the FSB.

[Zippit]

Originally Posted by pheoxs

Can someone link me to the Vdroop pic? I know its in here at least 10 times but I'd rather not look through 8700 posts finding it lol.

P.S. Zippit your new avy looks good.

Its on the first page... and thanks.

[dpawl31]

Yep. I put her pencil'n guide in post 3 I believe, click on the work THIS right before RESISTOR. lol

[Stenlius]

Things are getting better for me, 3,75 GHz for benchmark, not tested for stability yet . The NB has a 60 mm fan blowing towards it, it really helped.

[pheoxs]

Originally Posted by Zippit

Its on the first page... and thanks.

Doh ... its been so long since I've actually gone through this entire thread let alone check out the first page, maybe one weekend I'll have to catchup on everything.

[dpawl31]

Don't worry about the jibber jabber on the last 880 pages lol.
The first pages compiles just about everything, and anything else is answered here on a need-to-know basis.

Trust me, when I was gone for ~1 year, and came back to HUNDREDS of pages more, I went through about 85 and said screw it lol.

[Asce]

Seems so long since that first post now, doesnt it?