AMD+nVidia

Won't be long now homies until I get my WC setup, and then I'll start posting stuff!

__________________
Do you really think the iPhone isn't that big? Think Again

GoneTomorrow

Jing Ting makes good ones as well. I recommend the Spirits, very effective and low profile. The Thermalright is enormous but effective.

__________________
Stuff for sale!

Happy Birthday USMC!

Official OCN Camera Club
Canon 7D (Canon 70-200mm f/4 L IS | Canon 50mm f/1.4 | Canon 60mm f/2.8 Macro | Canon 10-22mm f/3.5-4.5 | 430EX II | Manfrotto 725b) flickr | photobucket

καὶ λέγει αὐτῷ Λεγιὼν ὄνομά μοι, ὅτι πολλοί ἐσμεν

sasaa

better let it degauss for 24 hours (connect pin 20+24 on powercable btw its green and black but think you would know that )
and if you can turn your pc upsidedown airbubbles ain't funny

what did you buy a zalman or termaltake or ?

__________________

_Hawke_

Hi all, i've been reading through this thread for about a week now and i've learnt lot so thanks all!
The trouble im having is that i cant get above a FSB of 1550, i can get to 1600 and post but it never makes it to windows, has anyone got any tips how i can get close to 4GHz with this processor and board combo??
My voltages are as follows:
NB 1.4
SB Auto
CPU Auto (setting it anythign up to intels max of 1.3625 makes no difference)
CPU VTT 1.55
Memory 2.2

I've had the NB up to 1.5 but it gets a little hot! and doesnt help at all!

Also im new to NB cooling, so any tips there if i remove the stock?

many thanks

mica3speedy

what bios are you using? Also make sure your ram and fsb are unlinked. I would also set cpu voltage to a manaully set voltage; and set 1.2ht to 1.3v.

_Hawke_

hi,
using bios 1404
yeah i already tried vt1.2 set to 1.3 and I set the cpu voltage to the max intel says 1.3625 and it didnt make any difference, i cant seem to push the FSB any higher....
RAM and FSB are unlinked already and sli ready mem is switched off...

mica3speedy

I'm out of ideas; hopefully someone has something that can help you. Not all chips overclock the same; you may have a bad batch. It happened with my e6700 .

_Hawke_

bummer ok, i dont know whether this means anything, but i cant drop the multi... i wanted to drop it to see how far i could up the FSB and on next boot it doesnt save it...

rmanuelb

Hi.

Can you post your Bios Voltage settings ?? ... Please...

Thanks

Regards...

__________________
CPU-Z Validation

mllrkllr88

Hey guys!
I need some expert help
I am trying to get to 4.0 and bench it. I have achieved 3.9 and got it to bench once but I cant get it back. The best I can get to bench now is 3.8. I have been scooping up all the tidbits of info I can, but I am NOT a pro. Does anyone have any tricks for me? I would really appreciate the advise. Here are my best "bench able" setting.

System:
FSB = 1900 X 8
Vcore = 1.5v
Mem = 1.9 (1.8 rated)
1.2v = 1.3v
NB = 1.5v
SB = 1.5v
VTT = 1.55v

Graphics:
PLAiT "Sonic" 9600GT
OC = 790/1975/1140
Stock = 700/1750/1000

Cooling:
Swiftech 2x120
Koolance CPU & NB
Swiftech Micro Res
Swiftech MCP350
Plenty of Antec 120 fans

Attached Thumbnails

 

__________________

Current Rig http://www.overclock.net/water-cooli...ml#post5968737
Current 06 Score 19741http://service.futuremark.com/result...&resultType=14
My Q6600 4.0 http://valid.canardpc.com/show_oc.php?id=553966