cognoscenti

No because at the beginning of the video is says different.

__________________

Q6600 @ 4017.37 MHz on Striker II

Q6600 3802.47 MHz (422.5 * 9) 790i Ultra

Q6600 4152.04 MHz (461.34 * 9) 8-8-8-18 790i Ultra

menko2

i think i´m having temps too high.

with vcore 1´4250 i reach 57ºC and it´s not even stable @ 3375 (375x9)

i put the thermalright 120 ultra with a 2000rpm fan and arctic silver 5.

the rest of options in voltages are;

memory--- 2´1v
1.2V------ 1´30v
NB core----1´40v
SB---------1´55v
CPU VTT---1´55v

is it normal???

Robilar

That is way to high for that cooler. What kind of airflow do you have in the case? The thermalright ultra 120 is slightly better than even the tuniq. At that OC you should be in the mid 40's.

t4ct1c47

E6600 @ 3.6GHz, even on a knackered board, WOOT!

Just need to get this sucker Orthos stable now, time to play with the chipset voltages me thinks.

Respect for the sig Cognoscenti!

__________________
3DMark06: 26220 3DMark Vantage: 21711 i7 920 @ 4.4Ghz

USlatin

ROFL

I was in a rush when I looked for the graphic to throw into Photoshop
I'll make sure and change that for the final cut. Thanks!


This is when it is cold in the room, I'd say 24-23 celsius

__________________

menko2

my case is the armor and i have several fans putting the air out.....

i just put again the arctic silver and 2 fans and i get a drop of 5ºC, but even with that, at íddle is 30ºC and load at 50ºC. just 3´150ghz....

not normal right??

t4ct1c47

menko2, I can't see those temperatures being an issue on your Athlon FX-57, they seem normal for 3Ghz+ on that kind of CPU. You could always try asking over in the AMD section for more confirmation.

__________________
3DMark06: 26220 3DMark Vantage: 21711 i7 920 @ 4.4Ghz

menko2

sorry, it´s not the fx-57 anymore. i just bought an e6600 with the p5n32-e sli. that´s the temps i´m getting in this board.

i will update now my system

t4ct1c47

In that case you temperatures seem fine for an E6600 at 3.1Ghz. My E6600 doesn't go above 53*C under load when at 3.6Ghz. When you come to overclock higher do try to keep your temperatures below 55*C under load.

__________________
3DMark06: 26220 3DMark Vantage: 21711 i7 920 @ 4.4Ghz

menko2

which voltaje do you use for your 3´4ghz???

or can you post your memories, voltajes,.... so i can have an idea of everything that i´m doing.

thank you!!