Kirmie

Hey guys, I know CoreTemp has been the standard for cooling on this board but has there been a change in this with the new bios that have come out? I'm getting about 5C difference between RealTemp and CoreTemp and I just want to double check.

Edit: Thought that I should mention that I have tried searching the thread but it does not seem to be working for me at the moment. I even tried searching for 1503, which is in the very first post, to no avail.

__________________
Come join OCNs 48-hour Fold-a-Thon NOW!!

Have you ever tried simply turning off the TV, sitting down with your children, and hitting them?

From American Dad:
I touched her hand... her hand touched her boob. By the transitive property, I got some boob! Algebra's awesome!

EVE (Kirmie, Brian Fellow) | ogame.org (Univ 35, Unv 41) | Gladiatus.us (Serv 7) | NativeKingdoms (Epatlan) | DoD:S

ACHILEE5

Are the TJ's both set to 100?

__________________
*OFFICIAL* Videos of your Games thread!

Q9650@4GHz 16hours Blend Stable 20 pass IBT Stable

Kirmie

^^ Not sure, I'm at work right now so I can't check until later. I was googling around a bit and it seemed as though that was an issue with the quads before RealTemp 2.75. I'm using a dual and RealTemp 3.0 so from the looks of things it is unlikely, but since the temperature difference is similar to those that were caused by the Tj Max being lowered to 95 I believe it could be the case.

__________________
Come join OCNs 48-hour Fold-a-Thon NOW!!

Have you ever tried simply turning off the TV, sitting down with your children, and hitting them?

From American Dad:
I touched her hand... her hand touched her boob. By the transitive property, I got some boob! Algebra's awesome!

EVE (Kirmie, Brian Fellow) | ogame.org (Univ 35, Unv 41) | Gladiatus.us (Serv 7) | NativeKingdoms (Epatlan) | DoD:S

xc90

i just change my cpu from e6400 to q6600 go, witch is the very best bios for this cpu??
thanks

R.I.P

somebody using new bios - P5N32-E SLI ACPI BIOS Revision 1801 04/24/2009

mica3speedy

It doesn't look like much has changed since the 1503 bios. I'm using the 1404 bios as the 1503 bios kept putting my multi at 9, no matter what I changed it too.

Tarabass

I had no problem running on 1701, with the system in my sig. Although my p5n32-e is now build in another system, and replaced by a strikerII formula

__________________
Assembling my Gamert PC

Vostro

Wow awesome guide!! I didnt know this was here! I am running the 1701 as well and having no problems. Quick question though what is the max voltage my e6750 can handle?

ACHILEE5

Looks like you can go up to 1.5v
http://processorfinder.intel.com/det...px?sSpec=SLA9V

__________________
*OFFICIAL* Videos of your Games thread!

Q9650@4GHz 16hours Blend Stable 20 pass IBT Stable

S P A T F R A K

hello guys , i'm gonna oc my system,since it was that or upgrade, and with ocing i learn some new tricks

mb:P5N32-E SLI
cpu: C2D E6600
mem: 2 x OCZ2T8002GK (so 4 x 1 gb) both sets in dual channel mode and fully SLI certified
BIOS:1503

I don't have any coolers yet , so i began with tweaking the memory timings

here's what i got : http://www.eclipseoc.com/index.php?id=1,106,0,0,1,0

I can't get it to the epp settings of 4-4-4-15-1T at 400(800)Mhz
[EDIT:it won't post],I tried voltage settings from 1.85 tot 2.250 (2.3 is warranty void)
I read somewhere else that epp won't work with 4 sticks of ram and 1T timings are also hard,2 sticks seems to be the max for 1t to work properly,but i hope you know a way

I got it to work at 720 Mhz 4-4-4-15-1T (2.0-2.1 V) and when i change to 4-4-4-15-2T i can crank the Mhz up but i read in the guide 1T is best.

All settings are on set on BIOS: manual , SLI disabled,Unlinked,
and no CPU oc yet (no proper coolers YET)

What are my options? can't i really get proper 1T timings with all ram slots full?

Also i would like to know at what CPU speeds a Chipset ,North and Southbridge cooler is needed next to a good CPU cooler
I thought of slowly pushing to 3.5-4 Ghz myself in the long run

Thanks a lot and great Guide btw already learned a lot here

Greetings Spat