|
|
|
 |
Overclock.net - Overclocking.net > Intel > Intel Motherboards | |
Abit IP35 Pro/XE Discussion/Help Thread
|
||
 |
|
|
LinkBack | Thread Tools |
08-02-07
|
#11 (permalink) | |||||||||||||
|
Windows Wrangler
 
|
and would the 14mm x 14mm Swiftech's fit individually on them?
if 12 then I'd get 6 left-over fets to use else wear... that's good...
__________________
"There is no point in having sharp images when you have fuzzy ideas."
Jean-Luc Godard . Treo 650 @ 442MHz!!! (142% from 312MHz) ROFL!!!
|
|||||||||||||
|
|
|
08-02-07
|
#12 (permalink) | |||||||||||||
|
ATI Enthusiast
|
OK, I added a list of the compatible heatsinks/water blocks, and I've looked around for a couple of them; if anyone has any additions, I'd be happy to add them. Also, I made a couple of small formatting changes.
Remember, I still need more valid OC's, so for those of you using the IP35 Pro, post a CPU-Z screenshot (or validation link), and I'll add you to the list.
__________________
|
|||||||||||||
|
|
|
|
08-03-07
|
#13 (permalink) | |||||||||||||
|
New to Overclock.net
|
Compatible Waterblock
Actually found one.... unfortunately it'll be expensive to get in the US.... still looking though...
__________________http://www.mips-computer.de/index.htm Here's a pic with all of their WB components.... 
|
|||||||||||||
|
|
|
|
08-03-07
|
#14 (permalink) | ||||||
|
Audiophile
|
Running my E6750 at 3.600 Ghz atm, load temps are in the mid 50's with a TT Big Typhoon. Stable in orthos and all gaming at 1.44 volts in BIOS (1.39v real at load).
__________________
|
||||||
|
|
|
|
08-03-07
|
#15 (permalink) | |||||||||||||
|
aka Skroober
 
|
Just got mine today, haven't tested it yet or anything.
__________________My one complaint is that the SATA connectors exit on the back of the board, it was real annoying trying to fit my cables and my HDD cage for the Armor Jr. I do like the Clear CMOS switch on back though.
|
|||||||||||||
|
|
|
08-03-07
|
#16 (permalink) | |||||||||||||
|
ATI Enthusiast
|
I had that problem with my case, too, but luckily my PC-A16 allows me to move the hard drive cage wherever I want to. Does the Armor Jr. allow it? If so, you could possibly move it out of the way while you connect the components. That's what I had to do to get everything to fit.
Meanwhile, I added some more water blocks, Iceman23's overclock, and a note about the sideways SATA ports to the first post.
__________________
|
|||||||||||||
|
|
|
|
08-03-07
|
#17 (permalink) | ||||||||||||||
|
aka Skroober
|
Quote:
|
||||||||||||||
|
|
|
|
08-03-07
|
#18 (permalink) | |||||||||||||
|
Freeze It
|
Well got my X3220 to 460fsb so far with this baord. Gonna shoot for more. Be back in a bit hopefully.
__________________
E6400@3856E4300@4158E6600@4510,Opti148@3102,opti170@2918,Xeon3220(B3)@3430(490fsb) UD3P@8400600FSB
|
|||||||||||||
|
|
|
08-03-07
|
#19 (permalink) | |||||||||||||
|
aka Skroober
|
I can't get RAID to install on this board...I enable RAID in BIOS but I can't get to the Drive Configuration Utility.
__________________
|
|||||||||||||
|
|
|
|
08-03-07
|
#20 (permalink) | |||||||||||||
|
Freeze It
|
Its like f10 or soemthing. Hit that after the intial bios post and it should come up.
__________________
E6400@3856E4300@4158E6600@4510,Opti148@3102,opti170@2918,Xeon3220(B3)@3430(490fsb) UD3P@8400600FSB
|
|||||||||||||
|
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
