Gigabyte GA-P35-DS3L Thread

[Jarrstin]

Originally Posted by bioniccrackmonk

I use the ZEROtherm Nirvana and it fits into my case with just a little bit left over. Massive cooler, but also one of the higher rated ones on anandtech's aftermarket cooler guide. I like it though, keeps my processor cool, might have been a bit of an overkill since the eE8400 is 45nm.

What kind of temps are you getting with it? BTW, thanks for the reply.

[c230k]

Originally Posted by NP2H

Depending on what coding you use, it's usually more efficient to code on a higher clock speed, rather than multiple cores, as much programs haven't been utilized for multiple cores.

Grats! Looks like a sweet rig

Thank you
I am just doing some rmvb->avi then burn to dvd for gf's mom since she doesn't like to watch stuff on computer...
Anyways, the 8400 could go higher, but I don't really have the guts to push the voltage higher. I pumped the voltage to 1.6 in bios and try to boot into windows @ 5ghz, but i stop it right after the post since I was scared

[RapiDJunioR]

Originally Posted by RapiDJunioR

Hi

im new in this board first i must say my english is bad.

i have some problems with my mobo

i cant overclocked it. i try all variants on my mit setups but i cant boot up system. it comes to post screen write "memory se" or "memory set" and reset after starting with default settings . i tryed bios update Qbios and Qflash but anything was changed. i try f5 f6 f7 f8a bios.

anybody help me about this problem?
if i dont fixed this problem i will buy p35 ds3r.

Originally Posted by RapiDJunioR

i have must use stock settings. but i can't boot up system this settings.
when i change or enable cpu host clock control , system dont boot up.
but i can changed RAM timings ,frequency and cpu clock ratio. for example i can use this settings

Robust Graphic Booster Auto
CPU Clock Ratio 10X
CPU Host Clock Control disabled
CPU Host Frequencey (mhz) 200
PCI Express Frequency (mhz) 100
C.I.A.2 Disabled
System Memory Multiplier (SPD) [2.00]
Memory Frequency (Mhz) 800 400
timings 4 4 4 12

but i cant boot this settings |
/


1.
Robust Graphic Booster Auto
CPU Clock Ratio 11X
CPU Host Clock Control Enabled
CPU Host Frequencey (mhz) 210
PCI Express Frequency (mhz) 100
C.I.A.2 Disabled
System Memory Multiplier (SPD) [4.00]
Memory Frequency (Mhz) 800 840

2.
Robust Graphic Booster Auto
CPU Clock Ratio 10X
CPU Host Clock Control Enabled
CPU Host Frequencey (mhz) 250
PCI Express Frequency (mhz) 100
C.I.A.2 Disabled
System Memory Multiplier (SPD) [2.00]
Memory Frequency (Mhz) 800 500

System Voltage Control [Manual]
Ddr2/ddr3 OverVoltage Control [Normal]
PCI-E OverVoltage Control [Normal]
FSB OverVoltage Control [Normal]
(G)MCH OverVoltage Control [Normal]
CPU Voltage Control [Normal]
Normal CPU Vcore 1.35000V

CPU Enhanced Halt (CIE) = Enabled
CPU Thermal Monitor 2 (TM2) = Enabled
CPU EIST Function = Enabled

please help me about this problem.
if i cant fix this problem i must bought a new mobo

[RapiDJunioR]

thanks for all helps

i take off all usb ports and fixed my problem. and i boot up 3ghz first experiment

[bioniccrackmonk]

Originally Posted by Jarrstin

What kind of temps are you getting with it? BTW, thanks for the reply.

After copying about 250GB from an old IDE HDD to my new 750GB SATA and installing several apps, my current temps read:

System: 32C/89F
CPU: 17C/62F

I live in FL by the way, our winters here aren't that cold and our summers are excruciating.

*These temps are at stock, haven't had a chance to OC yet.

[losttsol]

17C idle is plenty cool, probably less than ambient.

[c230k]

That is some good temp, mine has the idle bug...@@
core0 stucks at 41C while core1 stucks at ~36

[Splinky]

hey c230k,

do you use stock NB cooling? how are your voltages to reach 500 FSB?

I heard the NB gets mad hot.

Thanks

[c230k]

I have watercooling for my nb so it is around 30c.
I assume it would be quite hot with that tiny stock heatsink without any fans.
0.1v on both fsb and mch.

[dleccord]

Originally Posted by RapiDJunioR

please help me about this problem.
if i cant fix this problem i must bought a new mobo

kick it up a notch on the ram voltages.