Gigabyte GA-P35-DS3L Thread

[psmo290]

Originally Posted by Dylan

hmm having an issue with my ds3l ,

when i enter the boot menu (F12) i cant move anything , exit the box or make any changes ... any one hade this issue before?

Are you using a usb keyboard? If you are, enable USB Keyboard in bios. That might help.

[Jap1987]

Still trying to figure out how to get my Q9300 past 420FSB when I came upon something. My computer freezes everytime at the windows logo as long as my computer voltage is set to manuel. If I set it to auto it boots fine at 415x7.5 with 1.26 volts at idle(reading from HWmonitor and CPU-Z). When I manually set 1.26 even up to 1.28 it just freezes at the xp loading bar. I know it runs at 1.26 because im prime95 stable for 12hrs with a load voltage of 1.23.

[Jacko87]

Originally Posted by psmo290

Are you using a usb keyboard? If you are, enable USB Keyboard in bios. That might help.

Thanks for pointing that out...I feel so retarded now

[psmo290]

Originally Posted by Jacko87

Thanks for pointing that out...I feel so retarded now

no prob, i had the same problem and it worked for me.

[jlogan]

What´s the newest bios for the ds3l ? i have rev 1.0. and F7

i installed f8 but i had problems with the cpu-cooler, he was very loud

[Dylan]

Originally Posted by Jacko87

Thanks for pointing that out...I feel so retarded now

yeah me too

thanks for that

[wiggy2k7]

Can someone give me a second opinion on buying a new power supply... Im buying a new power supply as my 450W isn't upto the job, i was going to buy this one

http://www.ebuyer.com/product/127861

But then this one caught my eye..

http://www.ebuyer.com/product/124927

The 1st one is a little more money but that doesn't matter, which one would you go for.

Thanks

[web-blade]

Has anyone had any expierence with overclocking a Q6600 on this board. If so can you tell me about it please, the good and bad bits.

[losttsol]

Have you increased your RAM voltage? I would try overclocking with only 2GB of RAM in there until you figure it out. If your RAM is DDR2 800 then you might need to up the voltage. Make sure your RAM is set at 2.0 in BIOS (1:1 ratio) as well. 420FSB means your RAM will be overclocked to 840MHz.

[psmo290]

Originally Posted by wiggy2k7

Can someone give me a second opinion on buying a new power supply... Im buying a new power supply as my 450W isn't upto the job, i was going to buy this one

http://www.ebuyer.com/product/127861

But then this one caught my eye..

http://www.ebuyer.com/product/124927

The 1st one is a little more money but that doesn't matter, which one would you go for.

Thanks

I would go for the 700W. Especially if you plan to overclock. I'm planning to upgrade my psu in the future too. But 500W is enough for what I want right now.